+90 532 400 16 06 |info@aktek.com.tr

Ultrasonic Flow meters

  •
    Request a Quote
    Quick View

    Doppler Flow Meter 6.1
    • Enhanced Performance
    • Easy to Install and Configure
    • Non-Contacting Clamp-On Ultrasonic Sensor
    • Works on a Large Variety of Pipe Materials and Sizes
    • Large Back-lit Flow Rate Display and Totalizer
    • Isolated 4-20mA Output
    • 2 Programmable Control Relays
    • Optional MODBUS® RTU or HART Output
    • 128MB Data Logger (26 million points)
  •
    Request a Quote
    Quick View

    Transit Time Ultrasonic Flow Meter TTFM 6.1

    • 1/2” through 48” pipe range
    • Simple 5-key Configuration
    • 4-20mA/0-5V Output
    • 26 Million Point Data Logger
    • Backlit LCD Display
    • Password Protected
    • Modbus® RTU or HART Optional

  •
    Request a Quote
    Quick View

    Ultrasonic Flow Meter/Calorimeter TFM2000

    Flow rate or Heat/Energy measurement
    Measurement  accuracy 1%
    Wide measurement range, pipe sizes from DN15…..DN6000
    Three types of installation method, Wall mounted, DIN rail mounted, Ex-proof box mounted
    4 -20 mA, OCT Pulse, Relay outputs
    MODBUS Communication

  • AFLO-TT Ultrasonic Transit Time FlowmeterAFLO-TT Ultrasonic Transit Time Flowmeter
    Request a Quote
    Quick View

    Ultrasonic Transit Time Flowmeter AFLO-TT

    AFLO-TT Ultrasonic Transit Time Flowmeter is ideal to measure flow rate of clear, non-aerated fluids in full pipes. Works best on fluids that have less than 2% particulate or gas bubbles

    • User-Friendly Operating System
    • Works from the Outside of Common Pipe Materials
    • Works with Wide Range of Liquids
    • Wide Measuring Ranges Up to DN6000
    • Easy and Fast Mounting
  •
    Request a Quote
    Quick View

    Ultrasonic Flowmeter / Calorimeter TFM2100-NG

    Ultrasonic Flowmeter / Calorimeter TFM2100-NG measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe. This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.Clamp-on sensors: it is not necessary to stop the flow to install them; Wetted sensors.

  • ultrasonic transit time flowmeter
    Request a Quote
    Quick View

    Ultrasonic Flowmeter/Calorimeter TFM3100 – F1
    The Transit Time Flow Meter TFM3100  measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.
    This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.
    High accuracy measuring: Linearity: better than 0.5% Repeatability: better than 0.2%,  Accuracy: better than ± 1%
    Wide measuring range: Several types of transducers to be selected, measuring pipe sizes from DN15mm to DN6000mm with four different types of sensors + PT100 ohm when it works as heat meter.
    Italian or English menu: The different versions of TTFM100/2009 NEW GENERATION can support Italian or English display, easy to operate, in the near future other languages will be implemented.
    Power supply: 8….36 VDC or 10….30VAC
    Engineering Units: Flow: Imperial and metric – Calories: BTU; GJ; KW; KCal
    Dimensions / Protection Grade: 90 90 36mm / IP20
    Set-Up: By integrated keypad
    Output: Relay OCT/4-20mA/RS485
    Protocol: M-BUS, MODBUS
  •
    Request a Quote
    Quick View

    Ultrasonic Flowmeter TFM4100W
    Ultrasonic Flowmeter TFM4100W measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.
    This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.
  •
    Request a Quote
    Quick View

    Ultrasonic Flowmeter TFM5100-NG
    The Transit Time Flow Meter TFM5100-NG  measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.
    This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.
  •
    Request a Quote
    Quick View

    Ultrasonic Flowmeter TTFM100-F1-NG
    The Transit Time Flow Meter TTFM100-F1-NG  measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.
    This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.
    •Clamp-on sensors: it is not necessary to stop the flow to install them; Wetted sensors.
    •AC and DC supply: 85..264 VAC and 24 VDC.
    •The time difference during the measuring process could be 0.2 ns.
    •Analog (4-20 ma), pulses (relays), frequence, Pulse (OCT) and RS485 (M-BUS, MODBUS )outputs.
    •All the measures could be driven to the RS485 in order to save data into a PC remotely  transmitted by telemetry.
  • Transit Time Flowmeter TTFM1.0Transit Time Flowmeter TTFM1.0
    Request a Quote
    Quick View

    Transit Time Flow Meter, TTFM 1.0
    • Non-Contacting Clamp-on Ultrasonic Transducers
    • Works on Metal and Plastic Pipes
    • Large Backlit Flow Rate Display and Totalizer
    • Isolated 4-20mA Output
    • Built-in 5-Key Calibrator
    • 2 Programmable Control Relays
    • Optional 2 Million Point Data Logger
  • Doppler Ultrasonic Flowmeter DFM 5.0
    Request a Quote
    Quick View

    Doppler Ultrasonic Flowmeter DFM 5.1
    • User-Friendly Calibration
    • Password Protected
    • Isolated 4-20mA Output
    • 2 Control Relays
    • Digital Signal Processing
    • Optional Intrinsic Safety
  • Ultrasonic Slurry Flow MeterUltrasonic Slurry Flow Meter
    Request a Quote
    Quick View

    Ultrasonic Slurry Flowmeter SFM 6.1
    • Optimized for Slurries
    • Easy, Intuitive Set-Up
    • 5 Button Menu System
    • Isolated 4-20mA Output
    • Up to 6 Control Relays
    • Optional Built In Data Logger