• Conductivity Meter ECM 5.0

    Direct changeover to
    – Conductivity (μS/cm )
    – Resistivity ( MΩ x cm)
    – TDS measurement (ppm )
    Automatic temperature compensation
    4-20 mA Isolated Output
    Large LCD display with background lighting
    Communication MODBUS through RSD485
    Relay output

  • Dissolved Oxygen Analyzer DOM 5.0

    Measurement range DO: 0-20 mg/L, 0-20 ppm; Temperature: 0-45℃
    Measurement Accuracy DO: ±3% of the measured value,  Temperature: ±0.5℃
    Calibration Air automated calibration, sample calibration
    Output 2-way 4-20mA
    Relay Setting three-way relays,
    Communication protocol MODBUS  through RS485


    ·Easy operation
    ·NEMA enclosure for field mounting and panel mounting
    ·Automatically Temperature Compensation
    ·Directly switchable to PH or ORP
    ·Large LCD display with background lighting
    ·PH or ORP sensors can be connected thanks to the sensor supply integrated in the
    ·Using the setup program: user-friendly programming
    ·4-20mA analog output
    ·RS485 communication
    ·Relay output

  • Turbidity Meter TBM 5.0

    ·Measurement: Turbidity, MLSS concentration
    ·Measuring range: 0.00 – 4000NTU, 0.00-120000mg/L
    ·Maximum loop resistance: 750Ω
    ·Accuracy: 0.1%FS

  • Ultrasonic Thickness Gauge AT300

    • Two different measurement methods: “Single” and “Scan”
    • Single mode: measured value at just the touch point.
    • Scan mode: measure the minimum point in a specific area.
    • Range: 0.75 … 300 mm
    • 20 different file recording (99 admissions per file)
  • USM Level, Flow and Water Quality

    • Level and Pump Control
    • Open Channel Flow
    • Water Quality Measurement
      • pH,
      • Redox,
      • Dissolved Oxygen,
      • Conductivity,
      • Turbidity,
      • Temperature
  • Turbidity Sensor

    • IR optical sensor with optical fiber
    • Range: 0 to 4000 NTU or 0-4500 mg/L
    • Robust and waterproof (IP68)
    • Ultra low-power consumption
    • Digital output Modbus RS-485
    • ISO 7027 compliance (Nephelometry)
  • ph sensor

    pH Sensor

    • Combunation pH/Redox/Temp sensor
    • Digital Sensor : Modbus RS-485 / SDI-12
    • Calibration data inside
    • pH/ORP Cartridge
  • Dissolved Oxygen Sensor

    • Optical Technology without calibration
    • Digital Technology (Modbus RS-485)
    • No drift, Reduced maintenance
    • Robust, for field application
  • Conductivity – Salinity Sensor

    • 4 electrodes (2 graphic, 2 platinum)
    • Range 0 to 200mS/cm
    • Digital sensor / Modbus RS-485
    • Robust and Watertight
  • Hydrocell Waste Water Sampler

    Hydrocell Waste Water Sampler is specifically designed for Composite Collection of (flow/time proportional) samples of trade effluent discharges in industrial applications. A robust industrial design with state of the art touch screen programming and display makes the Hydrocell the product of choice for all your waste water sampling needs.

  • USI Flow & Water Quality Meter