PulsarGuard 2001 Sand Sensor
- Acoustic Intrinsically safe flow switch
- Clamp-on Sensor
- Intrinsically safe
- Use with the iSensys SandAlert Monitor
- Description
- Specifications
- Brochure
- Userās Guide
Product Description
The Pulsar Guard 2001 sand sensor is an ultrasonic acoustic sensor that has been designed primarily for use by the oil and gas industry. It is used in conjunction with the iSensys SandAlert sand monitoring system.
The sand sensor is connected to the outside of the pipeline with a stainless steel band (no need to break into a pipe or interrupt service) and detects changes in the acoustic signature of flow within the pipe and converting that into a sand/solids impact rate. As the sand sensor monitors only a narrow frequency band, it is highly resistant to interference from background noise, fluid or gas flow.
The Pulsar Guard 2001 sand sensor is an intrinsically safe unit (ATEX EEx ia IIC T4) made from 316 stainless steel with environmental protection to IP68. It can be fitted to any pipe diameter and may be positioned up to 1,000 m (3,280 ft) away from the iSensys SandAlert Monitor using a standard instrument cable connection.
| General Specifications | |
|---|---|
| Spec: | Description: |
| Dimensions | 118 mm L x 70 mm H x 65 mm W (4.65 in x 2.76 in x 2.56 in) |
| Material | Type 316 Stainless Steel (investment casting) |
| Cable Entry Detail | 1 x M20 Brass (fitted with EMC gland) |
| Relays | 3 Form āCā SPDT rated at 5 A at 240 V. Trip point from 0-100% of range |
| IP Rating (Electronics housing) | IP68 |
| Operating Temperature | -20 Ā°C to +80Ā°C (-4 Ā°F to +176 Ā°F) |
| CE Approval | EMC Approval to BS EN 50081-1:1992 for emissions, BS EN 50082-2: 1995 for immunity, BS EN 61010-11993 for low voltage directive |
| Hazardous Area | ATEX II 1 G EEx is IIC T4 (Tamb= -20 Ā°C to 80 Ā°C). Certificate No. Sira 04ATEX2110 |
| Analog Output | 0-5 V |
| Power Supply | 24 V DC via Galvanic or Zener Barrier |
| Current Consumption | Less than 20mA |
| Shipping Weight | Nominal, 1.5 kg (3.3 lbs) |
Approvals:
- CE, EMC Approval to BS EN 50081-1:1992 for emissions, BS EN 50082-2: 1995 for immunity, BS EN 61010-11993 for low voltage directive
- ATEX II 1 G EEx is IIC T4 (Tamb= -20 Ā°C to 80 Ā°C). Certificate No. Sira 04ATEX2110
ATEX Approval for PulsarGuard 2001
PulsarGuard 2001 DataSheet
PulsarGuard 2001 Installation & Instruction Manual
Related Products
-
Request a QuoteQuick ViewUltrasonic Transit Time Flowmeter AFLO-TT
AFLO-TT Ultrasonic Transit Time Flowmeter is ideal to measure flow rate of clear, non-aerated fluids in full pipes. Works best on fluids that have less than 2% particulate or gas bubbles
- User-Friendly Operating System
- Works from the Outside of Common Pipe Materials
- Works with Wide Range of Liquids
- Wide Measuring Ranges Up to DN6000
- Easy and Fast Mounting
-
Request a QuoteQuick ViewUltrasonic Slurry Flowmeter SFM 6.1
- Optimized for Slurries
- Easy, Intuitive Set-Up
- 5 Button Menu System
- Isolated 4-20mA Output
- Up to 6 Control Relays
- Optional Built In Data Logger
-
Request a QuoteQuick ViewTransit Time Ultrasonic Flow Meter TTFM 6.1
ā¢ 1/2ā through 48ā pipe range
ā¢ Simple 5-key Configuration
ā¢ 4-20mA/0-5V Output
ā¢ 26 Million Point Data Logger
ā¢ Backlit LCD Display
ā¢ Password Protected
ā¢ ModbusĀ® RTU or HART Optional -
Request a QuoteQuick ViewSandwich Type Ultrasonic Water Meter TFMW-1
Sandwich Insertion Ultrasonic Water Meter is a new style water meter specially designed for Ā agricultural irrigation, Garden Management and water resource supervision.
Advantages of this water meter ;
Low cost, high accuracy, low power consumption, stability and reliability.
1 inch thickness of the meter helps to save installation space, and parts to achieveĀ IP 68, enable the water works in any severe environment .
DueĀ to unique design, there will beĀ no pressure loss and different water medium will have no influence on measurement
Analog, Digital outputs and RS485
-
Request a QuoteQuick ViewUltrasonic Flow Meter/Calorimeter TFM2000
Flow rate or Heat/Energy measurement
Measurement Ā accuracy 1%
Wide measurement range, pipe sizes from DN15ā¦..DN6000
Three types of installation method, Wall mounted, DIN rail mounted, Ex-proof box mounted
4 -20 mA, OCT Pulse, Relay outputs
MODBUS Communication -
Request a QuoteQuick ViewSand/Particle Alert Monitor
-
Request a QuoteQuick ViewFlanged Ultrasonic Water Meter TFM6000-WF
Sandwich Insertion Ultrasonic Water Meter is a new style water meter specially designed for Ā agricultural irrigation, Garden Management and water resource supervision.
Advantages of this water meter ;
Low cost, high accuracy, low power consumption, stability and reliability.
1 inch thickness of the meter helps to save installation space, and parts to achieveĀ IP 68, enable the water works in any severe environment .
DueĀ to unique design, there will beĀ no pressure loss and different water medium will have no influence on measurement
Analog, Digital outputs and RS485
-
Request a QuoteQuick ViewUltra 5
Ā Ā Ā Non-Contacting Level and Pump Control and Flow Measurement
- 5 control relays
- Measurement range 125 mm to 40 m (5 in to 131 ft)
- Optional 4-20mA input
- Pre-programmed tank shapes
- Power run-on
- Pump Exercising
- Start point variation | Storm Control | Aeration control | Flush valve Control | Differential level control
-
Request a QuoteQuick ViewDoppler Flow Switch DFS 5.1
- Flow Control from the Outside of Metal or Plastic Pipes
- 5 amp DPDT Control Relay
- Adjustable ON/OFF Set-Points
- Hi or Lo Flow Alarm Mode
- Adjustable Time Delay
- Relay Status LED
- Flow Rate LED bargraph
-
Request a QuoteQuick ViewPulsarGuard 2010 Solids Flow detection
- Non-invasive and maintenance-free
- Simple bolt-on installation
- Low cost
- No moving parts and vibration resistant
- IP68 Stainless Steel housing
- Highly reliable in low or high temperature
- ATEX Flammable atmosphere approved (2011 option only)
