Pressure Transmitter PCE-28
- Any range from 0…25 mbar up to 0…1000 bar
- 4 ÷ 20 mA two-wire or 0 ÷ 10 V output
- Intrinsic safety certificate (ATEX, IECEx)
- Low-voltage version with ATEX and IECEx certificate (model PC-29A, PC-29B)
- Marine certificate – DNV, BV
- Communication protocol Modbus RTU
- Gold plated diaphragm
- SIL 1 certificate
- Version with local display
- Description
- Brochure
- User’s Guide
Product Description
- Any range from 0…25 mbar up to 0…1000 bar
- 4 ÷ 20 mA two-wire or 0 ÷ 10 V output
- Intrinsic safety certificate (ATEX, IECEx)
- Low-voltage version with ATEX and IECEx certificate (model PC-29A, PC-29B)
- Marine certificate – DNV, BV
- Communication protocol Modbus RTU
- Gold plated diaphragm
- SIL 1 certificate
- Version with local display
The pressure transmitter PCE-28 is applicable to the measurement of the pressure, under-pressure and absolute pressure of gases, vapors and liquids.The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid.The electronics is placed in a casing with a degree of protection from IP 65 to IP 68, depending on the type of electrical connection applied.
The pressure transmitter PCE-28 is designed to measure gauge pressure, vacuum pressure and absolute pressure of gases, vapors and liquids (including corrosive).
The pressure transmitter PCE-28 can be fitted with a range of additional process connectors, enabling them to be used in a conditions variety, such as dense media, reactive media, high and low temperature etc.
The pressure transmitter PCE-28 generate a 4…20mA signal using two-wire transmission, other pressure transmitter PCE-28 solution can be produced with 0…20 mA or 0…10V signal using three wire transmission.