Flanged Seals with Flush Diaphragm S-P
Flanged Seals with Flush Diaphragm S-P is a pressure-transmitting, diaphragm-type device. The pressure signal is sent to the cooperating pressure measuring device (pressure transmitter, pressure gauge) through manometric liquid filling the space between the separating diaphragm of the seal and the pressure measuring device.
- Description
- Brochure
Product Description
Flanged Seals with Flush Diaphragm S-P is a pressure-transmitting, diaphragm-type device. The pressure signal is sent to the cooperating pressure measuring device (pressure transmitter, pressure gauge) through manometric liquid filling the space between the separating diaphragm of the seal and the pressure measuring device. Flanged Seals with Flush Diaphragm S-P task is to isolate the pressure measuring device from damaging impacts caused by either medium or installation:
– low or high temperature, increased viscosity, impurities;
– vibrations of the installation (remote diaphragm seal).
Flanged seals with flush diaphragm S-P Brochure
Related Products
-
Request a QuoteQuick ViewPressure Transmitter AS
- Potentiometers for zero and span adjustment
- Accuracy 0,4%
- Measuring ranges: 0 ÷ 1; 0 ÷ 2,5; 0 ÷ 6; 0 ÷ 10; 0 ÷ 16; 0 ÷ 25
- Output signal 4 ÷ 20 mA or 0 ÷ 10 V
- Process connection 1/2”NPTM, G1/2″, M20×1.5, RG or RM
-
Request a QuoteQuick ViewSmart Hydrostatic Density Transmitter PG-28.Smart
- Density measuring range 0…1 g/cm³ or 0…2 g/cm³
- Accuracy 0.1%
- Output signal 4…20 mA + HART
- Static pressure limit 40 bar
- ATEX Intrinsic safety
-
Request a QuoteQuick ViewSmart Level Probe APC-2000 ALW/SG
- Programmable zero shift, range and damping ratio
- 4…20 mA output signal + HART protocol
- Accuracy: 0,1%
- Local display
-
Request a QuoteQuick ViewDifferential Pressure Transmitter AS-dP
- Accuracy: 0.4%
- Measuring ranges: 0 ÷ 1, 0 ÷ 2.5, 0 ÷ 4 bar 0 ÷ 6, 0 ÷ 10 bar ,0 ÷ 16, 0 ÷ 25 bar
- Output signal : 4 ÷ 20 mA or 0 ÷ 10 V
- Process connection: M20x1,5, 1/4″ NPTF
-
Request a QuoteQuick ViewSmart Differential Pressure Transmitter APRE-2200
- Several applications, including hydro-static measurement of: levels in pressure tanks, density and phase boundaries
- Ability to configure measuring range locally
- Digital PROFIBUS PA signal
- 4…20 mA output signal + HART protocol
- Accuracy 0.1%
- ATEX certificates (intrinsic safety, explosion proof)
- Fully welded active measuring element which guarantees tightness of oil system for many years
-
Request a QuoteQuick ViewDifferential Pressure Transmitter PRE-28
- Overloads up to 420 bar total static pressure
- Accuracy 0,25%
- Any range from 0…16 mbar up to 0…25 bar
- Intrinsic safety certificate (ATEX, IECEx)
- Marine certificate – DNV, BV
-
Request a QuoteQuick ViewPressure Transmitter PCE-28
- Any range from 0…25 mbar up to 0…1000 bar
- 4 ÷ 20 mA two-wire or 0 ÷ 10 V output
- Intrinsic safety certificate (ATEX, IECEx)
- Low-voltage version with ATEX and IECEx certificate (model PC-29A, PC-29B)
- Marine certificate – DNV, BV
- Communication protocol Modbus RTU
- Gold plated diaphragm
- SIL 1 certificate
- Version with local display
-
Request a QuoteQuick ViewHydrostatic Level Probes PCE-28P and APC-2000ALW/P
- Any measuring range from 0…200 mm to 0…3000 mm H2O
- ATEX intrinsic safety (version PCE-28P only)
- Smart version – with Hart protocol (version APC-2000ALW/P only)
- Marine certificate DNV (version PCE-28P only)
-
Request a QuoteQuick ViewSmart Differential Pressure Transmitter APRE-2000PD & APRE-2000PZ
- 4…20 mA output signal + HART protocol
- ATEX Intrinsic safety
- Static pressure limit up to 420 bar
- Accuracy 0.1%
- Gold plated diaphragms (Au)
- Wetted parts material Hastelloy C276
-
Request a QuoteQuick ViewBourdon Tube Manometers
The all stainless steel bourdon tube pressure gauges are designed for use in food, beverage, pharmaceutical, cryogenics, chemical and petrochemical processing industries, and in conventional and nuclear power plants.
