-
Request a QuoteQuick View
Bend Packers OP
Bend packers thanks to their construction are suitable for repairing in bend parts of pipelines at an angle from 45°to 90°.
-
Request a QuoteQuick View
Conductivity Meter ECM 5.0
Direct changeover to
– Conductivity (μS/cm )
– Resistivity ( MΩ x cm)
– TDS measurement (ppm )
Automatic temperature compensation
4-20 mA Isolated Output
Large LCD display with background lighting
Communication MODBUS through RSD485
Relay output -
Request a QuoteQuick View
DB Transducers Level, Volume, Flow
- ATEX Zone 1 & 2
- I.S. ATEX Zone 0 options
- Integral temperature compensation
- Narrow Beam Angles
- Standard 2 or 3 core screened cable extensions to 1000 m (3,280 ft)
- Patented DATEM (Digital Adaptive Tracking of Echo Movement) echo processing technology
- FM/FMc Approval
-
Request a QuoteQuick View
dBI HART Intelligent Transducers
- Self-contained
- Two-wire
- Solids or Liquids applications
- DATEM digital echo processing
- Various Mounting Options
- ATEX Zone 1 standard, Zone 0 optional
- Use standard programming tools or Pulsar’s dedicated PC system
-
Request a QuoteQuick View
dBI Profibus Transducer
- Self-contained
- Two-wire
- Solids or liquids applications
- Various Mounting options
- ATEX Approvals
- DATEM digital echo processing software
- Uses the standard programming tools on our dedicated PC system
-
Request a QuoteQuick View
dBMACH3 & dB3 with Double Sun Shields
- 0 m to 2.425 m (0 ft to 7.95 ft) measurement range
- ±1 mm (±0.04 in) accuracy
- ±0.5 resolution
- IP68/NEMA 6P
- ATEX Zones 1 & 2 approval standard. ATEX Zone 0 optional
-
Request a QuoteQuick View
Dissolved Oxygen Analyzer DOM 5.0
Measurement range DO: 0-20 mg/L, 0-20 ppm; Temperature: 0-45℃
Measurement Accuracy DO: ±3% of the measured value, Temperature: ±0.5℃
Calibration Air automated calibration, sample calibration
Output 2-way 4-20mA
Relay Setting three-way relays,
Communication protocol MODBUS through RS485 -
Request a QuoteQuick View
Doppler Flow Meter 6.1
- Enhanced Performance
- Easy to Install and Configure
- Non-Contacting Clamp-On Ultrasonic Sensor
- Works on a Large Variety of Pipe Materials and Sizes
- Large Back-lit Flow Rate Display and Totalizer
- Isolated 4-20mA Output
- 2 Programmable Control Relays
- Optional MODBUS® RTU or HART Output
- 128MB Data Logger (26 million points)
-
Request a QuoteQuick View
DUET Dual Ultrasonic Echo Transducer
- Unique patented non-contacting transducer
- Insensitive to air temperature variations
- 300 mm (11.8 in) Deadband
- Most accurate open channel flow system in the world!
-
Request a QuoteQuick View
FARSIGHT
- Temassız
- Zorlu uygulamalar için tasarlandı
- Mükemmel düşük hızlı ölçüm yetenekleri
- Akışkan yüzeyinden daha uzağa monte edilebilir
- Geniş ölçüm alanı
- Pulsar Measurement kontrolörleri veya üçüncü taraf RTU’lar veya kaydediciler için Modbus çıkışı
- Dahili eğim telafisi
- Ücretsiz konfigürasyon ve teşhis yazılımı
- 45 derece montaj braketi seçeneği
-
Request a QuoteQuick View
FARSIGHT
- Non-contacting
- Designed for challenging applications
- Excellent low-velocity measurement capabilities
- Can be installed further from fluid surface
- Large measurement area
- Modbus output for Pulsar Measurement controllers or third-party RTUs or loggers
- Built-in tilt compensation
- Free configuration and diagnostic software
- 45-degree mounting bracket option
-
Request a QuoteQuick View
Flow Monitor Fixed Installation For Pipe Flow Monitoring
- Provides power for FlowPulse 22-28 V DC and Universal AC 85-264 V
- Display for flow/velocity from a single FlowPulse controller
- Set up of FlowPulse sensor
- Two programmable relays for control and alarm
- Daily system/resettable totalizers
- Logging, set up, and download via optional Log Software