-
Request a QuoteQuick View
Ultrasonic Flowmeter/Calorimeter TFM3100 – F1
The Transit Time Flow Meter TFM3100 measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.High accuracy measuring: Linearity: better than 0.5% Repeatability: better than 0.2%, Accuracy: better than ± 1%Wide measuring range: Several types of transducers to be selected, measuring pipe sizes from DN15mm to DN6000mm with four different types of sensors + PT100 ohm when it works as heat meter.Italian or English menu: The different versions of TTFM100/2009 NEW GENERATION can support Italian or English display, easy to operate, in the near future other languages will be implemented.Power supply: 8….36 VDC or 10….30VACEngineering Units: Flow: Imperial and metric – Calories: BTU; GJ; KW; KCalDimensions / Protection Grade: 90 90 36mm / IP20Set-Up: By integrated keypadOutput: Relay OCT/4-20mA/RS485Protocol: M-BUS, MODBUS -
Request a QuoteQuick View
Ultrasonic Slurry Flowmeter SFM 6.1
- Optimized for Slurries
- Easy, Intuitive Set-Up
- 5 Button Menu System
- Isolated 4-20mA Output
- Up to 6 Control Relays
- Optional Built In Data Logger
-
Request a QuoteQuick View
Area-Velocity Flow Monitor AVFM 6.1
- No flume or weir required – submersible ultrasonic sensor measures velocity and level simultaneously to calculate flow. No moving parts to wear, foul, or clog.
- Built-in 5-button keypad, intuitive menu, and large backlit LCD display make the AVFM 6.1 the most operator-friendly area velocity flow meter on the market.
- Fast, simple, installation and setup.
- Improved performance in a wider range of operating conditions.
- At a glance, view flow rate, velocity, level, totalizer, relay status, and important diagnostic information on the LCD display.
- Three isolated 4-20mA outputs for flow rate, velocity, and level, and two relay outputs for pulse output or alarm.
- 6.5 million point data logger for greater flexibility of data monitoring, control, and reporting.
- Min, Max, and Total Flow data from the last 365 days is available on the LCD display, or download directly to a USB for easy reporting.
- Monitors flow rate, volume total, run hours, and diagnostic information through only two wires with the optional Modbus RTU serial communication output.
-
Request a QuoteQuick View
Portable Ultrasonic Transit Time Flow Meter TFM 1100P
- Backlit LCD Display
- Simple –16 key Calibration
- Built-in data-logger
- High accuracy measuring
- Wide measuring range from DN15 to DN6000
- RS-232 serial interface
-
Request a QuoteQuick View
Insertion Magmeter ISM 5.0
- Electromagnetic with no moving parts
- Simplified hot tap insertion design
- Installs in 3-72″ (80-1800 mm) diameter pipes
- Selectable 4-20mA, 0-5V or 0-10V output
- 0-500Hz frequency output
- Scalable pulse output