SandAlert Portatif

  • Akustik Kendinden güvenli akış anahtarı
  • Kelepçeli Sensör
  • Kendinden güvenli
  • Isensys SandAlert Monitor ile kullanın
  • Açıklama
  • Uygulama Alanları
  • Özellikler
  • Teknik Doküman
  • Kullanma Kılavuzu

Ürün Açıklaması

SANDALERT PORTATİF:

 

İSensys SandAlert Portatif, bir sensör, montaj kayışı ve 50 m (164 ft) uzatma kablosu içeren eksiksiz bir taşınabilir kum izleme sistemidir. SandAlert Portable, taşınmasını ve sabitlenmesini kolaylaştıran sağlam bir pelikan çantasına Sabitlenmiştir.  A SandAlert Monitor provides a graphics display that gives real-time sand data and trend information for up to 90 days at 1-minute intervals. A PC interface is also available and allows data to be downloaded and graphical analysis to be conducted. The iSensys SandAlert Portable is perfect for short-term well evaluation and to determine methods of control.

 Oil and gas well operators know how important it is to maintain production at optimum levels, and an important part of that optimization is a clear and accurate measurement of solids production. The iSensys SandAlert range provides robust, dependable measurement of solids within the production stream so plant operators can be confident they are operating as efficiently as possible.
The SandAlert Monitor consists of two parts, The PulsarGuard 2001 sensor, a small robust clamp-on acoustic monitor, and the SandAlert controller. SandAlert is ideal wherever you need to keep wells producing efficiently at the highest rate possible; whenever you need a quantitative, real-time, and accurate measurement of produced solids/sand particles.
For years, the market has demanded the capability of measuring particles without needing flow data. The unique PulsarGuard sensor is installed after a suitable pipe bend where the turbulent flow profile is fully developed. The sensor measures solids production directly, without the need for an external or additional flow measurement.

• Oil & Gas
• Sand Monitoring
• Maximize Well Productivity
• Pipe Monitoring
• Asset Management
• Well Efficiency
• Valve Protection

General Specifications
Spec: Description:
Cable Entry Detail SandAlert Monitor: 6 cable gland knockouts on the base (4 x PG11, 1 x PG9, 1 x PG13.5) and 5 on the rear (5 x PG11)
PulsarGuard 2001 Sensor: 1 x M20 Brass (fitted with EMC gland)
Relays 3 Form “C” SPDT rated at 5 A at 240 V. Trip point from 0-100% of range
Extension Cable 50 m (164 ft)
Operating Temperature (Electronics) -20 °C to +60°C (-4 °F to +140 °F)
Operating Temperature (Sensor) -20 °C to +80°C (-4 °F to +176 °F)
IP Rating IP65 with lid closed, IP50 with lid open
CE Approval Sensor: EMC Approval to BS EN 50081-1:1992 for emissions, BS EN 50082-2: 1995 for immunity, BS EN 61010-11993 for low voltage directive
Hazardous Area Sensor: ATEX II 1 G EEx is IIC T4 (Tamb= -20 °C to 80 °C). Certificate No. Sira 04ATEX2110
Analog Outputs 4-20mA/0-20mA into 500 ohms (user programmable and adjustable) 0.1% resolution
Digital Outputs RS232 via RJ11 port
Communications RS485 Modbus protocol
Power Supply 90-260 V AC or 24 V DC. Power consumption 20 W maximum
Dimensions 406 mm x 330 mm x 174 mm (15.98 in x 12.99 in x 6.85 in)
Options
Option: Description:
PC Interface Allows data to be downloaded and graphical analysis to be conducted
Cases Battery Case: providing 24 V DC
Toolkit Case: providing all the tools necessary for installing the SandAlert Portable in remote locations

Onaylar

Sensor

  • CE, EMC Approval to BS EN 50081-1:1992 for emissions, BS EN 50082-2: 1995 for immunity, BS EN 61010-11993 for low voltage directive
  • ATEX II 1 G EEx is IIC T4 (Tamb= -20 °C to 80 °C). Certificate No. Sira 04ATEX2110

 

SandAlert Broşür

SandAlert Teknik Doküman

SandAlert Portatif K. Kılavuzu