Differential Pressure Transmitter PRE-28

Overloads up to 420 bar total static pressure

• Accuracy 0,25%
• Any range from 0…16 mbar up to 0…25 bar
• Intrinsic safety certificate (ATEX, IECEx)
• Marine certificate – DNV, BV

The differential pressure transmitter PRE-28 is applicable to the measurement of differential pressure of gases, vapors and liquids.

The differential pressure transmitter PRE-28 is designed to measure gauge pressure, vacuum pressure and absolute pressure of gases, vapors and liquids (including corrosive).

The differential pressure transmitter PRE-28 is used to measure liquid levels in closed tanks, and to measure differential pressure at filters, orifices and others. The differential pressure transmitter PRE-28 with P-type connectors are designed to work with static pressure of up to 4 MPa only. The differential pressure transmitter PRE-28 with C-type vented connectors to mount together with a valve manifold are designed to work with static pressure of up to 25 MPa.

To measure a medium which contain suspensions or impurities, or are viscous, hot, corrosive etc., use PRE-28 transmitter with a single diaphragm seal.

PRE-28 transmitter can be fitted with a range of additional process connectors, enabling them to be used in a conditions variety, such as dense media, reactive media, high and low temperature etc.

The PCE-28 or PRE-28 transmitters and the PCE-28P probes generate a 4…20mA signal using two-wire transmission, other PCE-28 and PRE-28 solution can be produced with or 0…10V signal using three-wire transmission.