Aktek Endüstriyel

Contact Us

FARSIGHT

  • Non-contacting
  • Designed for challenging applications
  • Excellent low-velocity measurement capabilities
  • Can be installed further from fluid surface
  • Large measurement area
  • Modbus output for Pulsar Measurement controllers or third-party RTUs or loggers
  • Built-in tilt compensation
  • Free configuration and diagnostic software
  • 45-degree mounting bracket option

Product Description

Providing the highest confidence in challenging velocity measurement applications while maintaining maximum performance. Versatile and robust enough for applications in environmental, water and wastewater, and general industrial markets.

High Performance, Non-Contact Velocity Sensors

With excellent low velocity measurement capabilities, enhanced beam-width, built-in tilt compensation, rainfall interference discrimination, and low-power consumption with Modbus output, the Pulsar Measurement FarSight is the right choice for demanding remote or mains-powered velocity applications.

Tried and Tested

Specifically designed with global challenging weather conditions in mind, the FarSight velocity sensor has been tried and tested in a wide range of climate conditions, including UK tropical storms Dudley, Eunice, and Franklin. With no loss of data recorded, the FarSight provided repeatable and accurate results thanks to its more powerful signal processing and rainfall discrimination system.

Easy to Install and Use

Skill and resource requirement from installation is minimized thanks to the built-in tilt sensor which auto-mitigates user error in installation angle. With the standard Modbus output, the FarSight is compatible with both third-party RTU’s or Loggers as well as controllers from Pulsar Measurement like the FlowCERT and The Ultimate Controller. The FarSight can be used with continuous power, or at longer intervals to reduce power consumption when connected to a logger.

Enhanced Measurement Capabilities

The FarSight can be mounted as far away as 15 meters (49 feet) from the water surface, making it great for applications where the mounting location can’t be changed, like river flows underneath a bridge. The measurement area of the sensor can be as large as 3 meters (9.8 feet), which means less sensors are required for measuring the velocity across wider channels. The FarSight is the right choice for applications with variable flow rates thanks to the ability to measure velocities as low as 0.2 meters per second (0.66 ft/s).

• River Flow
• Open Channel Flow
• Effluent Flow
• Remote Installations
• Irrigation
• Metals & Mining

General Specifications
Specification:  Description:
Measurement Method: Non-contact radar velocity
Radar Frequency: 24 GHz (K-Band)
Materials: PVDF body, valox 357 cap and submersion shield
Mounting: 1-inch BSP rear thread with BReez adaptor
Optional mounting brackets also available
Cable: 5-core, screened, max 500 m (1,640 ft) separation from controller / RTU / Logger
Operational Range: Up to 15 m (49 ft) vertical height from target
Velocity Range: ±0.2 m/s to ±6 m/s (±0.66 ft/s to ±19.7 ft/s) in most applications. Performance may vary depending on application
Accuracy: ±1.5% or ±0.05m/s (±0.016 ft/s), whichever is greater
Width of Meas. Area: Up to 3 m (9.8 ft)
Tilt Compensation: Electronic, for 30° to 50° from horizontal, standard
Ingress Protection: IP68 / NEMA6P
Ambient Process and Connection Temperature: -40°C to +80°C (-40°F to +176°F)
Output: Modbus RTU via RS485
Operating Voltage: 10 to 28 VDC
Power Consumption: 0.42W when on, with support for complete power shutoff when connected to RTU or logger
*See brochure or datasheet for complete specifications

Water

Wastewater

Food

Petrochemicals

Beverage

Oil and Gas

Power

Paper

×
Hello, I want to get information.