Electronic Pressure Calibrator TLDMM
Digital Reference Pressure Indicator Type TLDMM (electronic Pressure Calibrator)
- Accuracy: ±0.05% v.E., Ranges up to 2000 bar available
- 1 year autonomy without recharging (battery operated)
- Pressure units “bar”, “mbar”, “psi”, “MPa”, “kPa” switcheable
- PEAK function (positive and negative)
- Digital Filter (programmable)
- Pressure connection: 1/2″ BSP male
- Clear easy to read LCD display with large numbers
- Including S.I.T. Calibration Certificate (similar to DKD cert.)
- Description
- Application Areas
- Specifications
- Brochure
- User’s Guide
Product Description
Digital Reference Pressure Indicator Type TLDMM (electronic Pressure Calibrator)
- Accuracy: ±0.05% v.E., Ranges up to 2000 bar available
- 1 year autonomy without recharging (battery operated)
- Pressure units “bar”, “mbar”, “psi”, “MPa”, “kPa” switcheable
- PEAK function (positive and negative)
- Digital Filter (programmable)
- Pressure connection: 1/2″ BSP male
- Clear easy to read LCD display with large numbers
- Including S.I.T. Calibration Certificate (similar to DKD cert.)
The TLDMM can be used with portable or stationary calibration pressure sources like LSP spindle pumps and portable calibration pump LPP 30 (pneumatic) and / or LPP 700 LPP 1000 (hydraulic).
- Linearity and Hysteresis: #±0.05% FS
- Readings per sec. (0 filter) 10 (100 ms)
- Temperatures: Reference: +23°C, Ambient 0...+50°C, Storage -10...+60°C
- Temperature Effect (1°C): on Zero #±0,002%; on Sensitivity #±0,002%
- Programmable Functions: Zero: 50%, digital Filter: 0...99%
Display Resolution: 1, 2, 5 or 10 Digits
Pressure Units: bar, mbar, MPa, kPa, psi
Baudrate RS232 (Option): 19200, 9600, 4800
Peak-Function: Positive (+) and Negative (-) - Display: LCD, height 16 mm
- Power Supply: 4 Alkaline Batteries 1,5 V (size AA)
- Mechanical Limit Values (referred to nominal pressure): Service Pressure: 100% FS; High Dynamic Pressure: 75% FS Permissible Pressure: max. 150% FS; Breaking Pressure: >300% FS
- Standard Process Coupling: 1/2 BSP male
- Recommended Gasket: USIT A 63-18
- Tightening Torque: 28 Nm (Tightening Wrench: 27 mm)
- Housing: Material: Aluminium, Dimensions: appr. 132 x 80 x 48 mm
- Protection: IP 40
- RS232-Interface (optional) 9-pole D-SUB (female)
TLDMM, Electronic Pressure Calibrator Brochure
TLDMM, Electronic Pressure Calibrator User Guide
Related Products
-
Request a QuoteQuick ViewElectronic Pressure Calibrator PC4
Electronic Pressure Calibrator PC4 with internal pressure source up to 1000 mbar Pressure – Vacuum – Differential Pressure PC4,Electronic Pressure Calibrator is an appliance for verification and calibration of pressure sensors, pressure gauges, as well as pressure switches for low pressures. The combination pressure measuring unit and pressure generator allows a variety of applications in the laboratory as well as in the field.
-
Request a QuoteQuick ViewIntelligent Pressure Calibrator AK601B
Technical Specifications:Pressure :-1…0 Bar, 0….600 Bar, Accuracy: 0,05% F.S
Current measurement: 0 …25 mA, Accuracy: ( 0,02%R.D+0,005%F.S)
Voltage measurement: 0 …25 V, Accuracy: ( 0,02%R.D+0,005%F.S)
Temperature compensating range: 0…50 oC
DC output: 24 VDC (<24 mA), Accuracy: 1% F.S.
Power supply: lithium batterypower supplied or special adapterOverall dimensions 171.5mm x 110mm x 44mmWeight: 0,7 kg -
Request a QuoteQuick ViewDeadweight Tester LDW 1000
- Deadweight Tester LDW 1000
- Pressure Balance – Primary Standard for Pressure
- Ranges 0.2…60 bar, 1…250 bar, 2…600 bar, 2…1000 bar 2.9…1,000 psi, 14.5…5,000 psi, 29…10,000 psi, 29…15,000 psi
- Accuracy (total uncertainty of measurement) ±0.025% of measured value
- Self-sustaining complete system, also suitable for on-site measurements / calibrations
- Including Certificate of Calibration, traceable to National Standard (optional: DKD certification)
-
Request a QuoteQuick ViewIntelligent Calibration Module IKM
IKM Intelligent Calibration Module for Deadweight Tester(Pressure Balances)Used in combination with a deadweight tester (pressure balance) to determine the required mass loadsConversion into all common pressure unitsConsideration of the local gravity on-siteConsiders all critical ambient parameters to improve the measuring accuracyEasy calibration of pressure transmitters through integrated voltage supply and multimeter function (optional)Self-sustaining system, PC-independentRetro-fitting possible, for all deadweight tester (pressur balances) available on the market -
Request a QuoteQuick ViewDry Block Temperature Calibrator PULSAR-35CU
Dry Block Temperature Calibrator PULSAR-35CUfor mobile or stationary usemicro processor operated (PID)ramp function, thermostat test -
Request a QuoteQuick ViewPortable Fluid Bath FLUID 100/200/200-H
MODELS / Temperature Ranges:FLUID 100: from 10°C to +125°CFLUID 200: from ambient temperature to +200°CFLUID 200-H: from ambient temperature to +220°CMobile and stationary, ramp function, Thermostat testsRecommended for the calibration of glass thermometersOPTIONAL conversion kit to Dry Block temp. calibrator -
Request a QuoteQuick ViewElectronic Pressure Calibrators TLDMM-A01 and TLDMM-A02
TLDMM-A01: Digital Test Pressure Gauge ±0.1% f.s.TLDMM-A02: Digital Test Pressure Gauge ±0.2% f.s.Ranges up to 2000 bar available1 year autonomy without recharging (battery operated)Pressure units “bar”, “mbar”, “psi”, “MPa”, “kPa” switcheablePEAK function (positive and negative)Digital Filter (programmable)Pressure connection: 1/2″ BSP maleClear easy to read LCD display with large number -
Request a QuoteQuick ViewDry Block Temperature Calibrator PYROS-375
- Temperature range (at +20°C ambient temperature): +30°C…+375°
- For 230 VAC and 115 VAC autorange (PYROS-125) resp. switchable
- For mobile use on site and stationary use
- Thermostat test facility
-
Request a QuoteQuick ViewElectronic Pressure Calibrator LEC 200
Multi-Function Calibrator LEC 200
- Highest accuracy in class up to ±0.015% of reading.
- Source / Read thermocouples (13), RTDs (19; ohms, current, voltage, frequency and pulse trains (only source).
- Isolated mA / V read-back circuit for complete transmitter calibration.
- Programming of setpoints to speed up calibration tasks.
- Entry of custom RTD coefficients.
-
Request a QuoteQuick ViewPneumatic Comparator AK673A
- Pressure range : -0,98….60 Bar
- Stability: 0,05% F.S.
- Working media: Air
- Output interface : M20X1,5 female
- Overall dimensions : (LxWxH): 325 x 210 x 170mm
- Weight : 4,5 kg
