Thermal Mass Flow Switch 7000NH – 7200NH
Switch contact closure: 5 amp at 5 VDC & 115VAC
Trip point accuracy: ± 1% of set point
Fluid temperature range: -40° to 65°C
Pressure rating, maximum: 500 PSI Std., > 500 PSI, special
Input power requirement: 24 VDC @ 250 mA max., 230 VAC 50/50 Hz optional
Flow Transmitter enclosure: IP66, 125 x 125 x 100 mm ABS plastic with polycarbonate cover
Wetted materials: All 316 SS (ceramic, glass, & epoxy optional)
- Description
- Specifications
- Brochure
Product Description
The EPI Series 7000NH Thermal Mass Flow & Mass Velocity Switches are the net result from over a decade of flow metering and design experience within the industry. Series 7000NH products directly measure the gas molecular rate of flow, correcting for temperature changes and being insensitive to pressure changes.
Switch contact closure: 5 amp at 5 VDC & 115VAC
Trip point accuracy: ± 1% of set point
Fluid temperature range: -40° to 65°C
Pressure rating, maximum: 500 PSI Std., > 500 PSI, special
Input power requirement: 24 VDC @ 250 mA max., 230 VAC 50/50 Hz optional
Flow Transmitter enclosure: IP66, 125 x 125 x 100 mm ABS plastic with polycarbonate cover
Wetted materials: All 316 SS (ceramic, glass, & epoxy optional)
Switch contact closure: 5 amp at 5 VDC & 115VAC
Trip point accuracy: ± 1% of set point
Fluid temperature range: -40° to 65°C
Pressure rating, maximum: 500 PSI Std., > 500 PSI, special
Input power requirement: 24 VDC @ 250 mA max., 230 VAC 50/50 Hz optional
Flow Transmitter enclosure: IP66, 125 x 125 x 100 mm ABS plastic with polycarbonate cover
Wetted materials: All 316 SS (ceramic, glass, & epoxy optional)
Thermal Mass Flow Switch 7000NH - 7200NH Brochure
Related Products
-
Request a QuoteQuick ViewEgg Shaped Pipe Stoppers UV, UVP
These pipe stoppers are used for sealing of egg-shaped sections.
-
Request a QuoteQuick ViewHigh Pressure Pipe Stoppers UU
If the standard sealing pipe stoppers cannot be used due to high back pressure, these high-pressure pipe stoppers are recommendable.
-
Request a QuoteQuick ViewMechanical Flow Meter Medium Serie
Switches: field adjustable, suitable for batching,
trending, totalising or recording where required.
0-10 v or 4-20mA output. -
Request a QuoteQuick ViewSandwich Type Ultrasonic Water Meter TFMW-1
Sandwich Insertion Ultrasonic Water Meter is a new style water meter specially designed for agricultural irrigation, Garden Management and water resource supervision.
Advantages of this water meter ;
Low cost, high accuracy, low power consumption, stability and reliability.
1 inch thickness of the meter helps to save installation space, and parts to achieve IP 68, enable the water works in any severe environment .
Due to unique design, there will be no pressure loss and different water medium will have no influence on measurement
Analog, Digital outputs and RS485
-
Request a QuoteQuick ViewArea-Velocity Flow Monitor AVFM 6.1
- No flume or weir required – submersible ultrasonic sensor measures velocity and level simultaneously to calculate flow. No moving parts to wear, foul, or clog.
- Built-in 5-button keypad, intuitive menu, and large backlit LCD display make the AVFM 6.1 the most operator-friendly area velocity flow meter on the market.
- Fast, simple, installation and setup.
- Improved performance in a wider range of operating conditions.
- At a glance, view flow rate, velocity, level, totalizer, relay status, and important diagnostic information on the LCD display.
- Three isolated 4-20mA outputs for flow rate, velocity, and level, and two relay outputs for pulse output or alarm.
- 6.5 million point data logger for greater flexibility of data monitoring, control, and reporting.
- Min, Max, and Total Flow data from the last 365 days is available on the LCD display, or download directly to a USB for easy reporting.
- Monitors flow rate, volume total, run hours, and diagnostic information through only two wires with the optional Modbus RTU serial communication output.
-
Request a QuoteQuick ViewMechanical Flow Meter Low Flow
-Water, De-Ionised Water
-Soluble Oils (Glycols)
-Petroleum Based Fluids
-Synthetic Based Fluids Coolants
-Corrosive Fluids Paints Solvents
-Air & Gases -
Request a QuoteQuick ViewMechanical Flow Meter Large Serie
A scaled dial and mechanical indicator continuously monitor the flow rate at any given time whilst electrical switches can be specified to signal when a particular level has been reached during increasing or decreasing flow rates. 3″ 0-1500 LPM 4″ 0-2000 LPM 6″ 0-3500 LPM 8″ 0-5000 LPM
-
Request a QuoteQuick ViewMantaRay Portable Area-Velocity Flow Meter
- Measures flow in partially filled pipes and open channels
- No flume or weir required
- 4-20mA and Relay outputs for connection to Samplers and SCADA
- Powered with built-in rechargeable NiMH batteries
- 2 million point data logger with USB output to Flash drives
- Backlit LCD display for flow rate, totalizer and menu system
-
Request a QuoteQuick ViewStingray 2.0 Portable Level-Velocity Logger
- Measures water level and velocity in partially filled pipes and open channels
- No flume or weir required
- Extreme low power consumption Uses standard Alkaline D-cell batteries
- 130,000 point data logger
- USB output
- Powerful Windows software
- LCD bar graph display
-
Request a QuoteQuick ViewUltrasonic Transit Time Flowmeter AFLO-TT
AFLO-TT Ultrasonic Transit Time Flowmeter is ideal to measure flow rate of clear, non-aerated fluids in full pipes. Works best on fluids that have less than 2% particulate or gas bubbles
- User-Friendly Operating System
- Works from the Outside of Common Pipe Materials
- Works with Wide Range of Liquids
- Wide Measuring Ranges Up to DN6000
- Easy and Fast Mounting
