Thermal Mass Flow Meter 8200MP

Outputs: 4 – 20mA, 0 – 5VDC
Signal Interface: RS232 & RS485 Modbus RTU
Accuracy: +/- 1%
Gas Temperature Range: -40…+200C
Power: 24VDC 250mA
Display: 2 lines, 16 characters
Keypad: 4-buttons
Wetted Materials: 316 Stainless Steel (Hastelloy optional)
Protection: IP66
Traceable Calibration Certificate: NIST Standard
ATEX Certificate: CE 0344; EX II 2GD / EEx d IIB + H2

  • Application Areas
  • Specifications
  • Brochure

AUTOMOTIV INDUSTRY
Compressed Air monitoring * Natural Gas consumption * Powder paint air flow * Paint booth/paint oven ventilation

UTILITY SERVICES
Stack or Flue Gas * Wastewater aeration * Ventilation systems * Digester Gas * Gas flows * Nitrogen purge * Combustion air * Boiler inlet air

FOOD PROCESSING
Drying air * Ventilation systems * Boiler inlet air * Exhaust gas * Process control * Compressor lines * HVAC Air balancing * Duct flows * Energy conservation * Fume hoods * Cleanrooms * Laminar flow benches

LABORATORY AND R & D
Flow research * Biomedical studies * University studies * Toxicology studies * Energy studies * Industrial Hygiene * Occupational Safety * Experimentation

PETROLEUM & GAS INDUSTRIES
Custody transfer * Landfill Gas recovery * Flare Gas measurement * Gas mixing * Gas quality studies * Leak testing

RAW MATERIALS INDUSTRIES
Pulp & Paper mills * Mining * Semiconductor manufacturing * Chemical processing * Primary metals * Plastics & synthetics

Linear signal output : 0–5 VDC & 4–20 mA

Signal Interface : RS232 & RS485 Modbus RTU

Accuracy, including linearity (Ref.: 21°C)* : ±[1% of Reading + (.5% + .02%/°C of Full Scale)] ±0.2% of

Repeatability : Full Scale

Sensor response time : 1 second

Turn down ratio : 100:1 minimum

Electronics temperature range : -40°–85°C (-40°–185°F)

Gas temperature range** : -40°–200°C (-40°–392°F), extended range available

Gas pressure effect : Negligible over ± 20% of absolute calibration pressure

Pressure rating maximum : 500 PSI Std., > 500 PSI special

Input power requirement : 24VDC @ 250mA 115 VAC 50/60 Hz optional 230 VAC 50/60 Hz optional

Flow Transmitter power requirements : 5 watts maximum

RAM Back-up : Lithium Battery

Wetted materials : 316 Stainless Steel (Hastelloy optional)

Standard temperature & pressure (STP) : ) 70°F & 29.92" Hg (Air .075 lb./cubic foot)

NIST traceable calibration : Standard

THERMAL MASS FLOW METERS 8200 MP BROCHURE