IMP+ Ultrasonic Level Transmitter
- Compact self-contained level measurement
- Calibrate without compromising the IP67 rating
- Simple menu led set-up
- High power and narrow beam angles
- Description
- Application Areas
- Specifications
- Brochure
- User’s Guide
Product Description
The IMP+ non-contacting ultrasonic sensor is designed to be used wherever you need an accurate and reliable level measurement. Its digital echo processing means the IMP+ is perfect for slurries, liquids, or anywhere you need a display telling you the level or analog output to interface with your site control system or drive a display.
There are several measurement ranges available from 0 m to 10 m and each can be wired for 2 or 3-wire operation. All options feature an LCD display and digital temperature measurement and compensation. When combined with Pulsar’s PC Suite, users are able to download, analyze and store echo profiles, set up the IMP’s parameters, install the new firmware to your IMP, and add a flow curve to be able to configure level to flow linearization.
• Tank Level Applications
• Chemical Dosing
• Simple Level Indication
• Open & Closed Vessel Level Requirements
• Solids Level Indication
| Dimensions | 186 mm (H) x 133 mm (D) (5.24 in (H) x 7.32 in (D)) |
| Cable Entry: | 2 off cable glands 4.5 mm to 10 mm (0.18 in to 0.39 in); Torque to 2 NM |
| Mounting: | IMP3 - 3 m (10 ft) version: 1.5 in BSP/NPT IMP 6 - 6 m (20 ft) version: 1.5 in BSP/NPT IMP10 - 10 m (33 ft) version: 2 in BSP/NPT Suits BSP & NPT, parallel and tapered |
| Weight | Nominal 1kg (2.2 lb) |
| Enclosure Protection | IP67 |
| Temperature (Process) | -4 0°C to +65 °C (-40 °F to +149 °F ) |
| Temperature (Ambient) | -40 °C to +80 °C (-40 °F to +176 °F) |
| Input Voltage Range | 11-30 V, 3.5-22 mA |
| Accuracy | ±0.25% or 6 mm (0.24 in) whichever is greater |
| Resolution | ±0.1% or 2 mm (0.08 in) whichever is greater |
| 4-20mA Outputs | Resolution 5 ÎĽA; both active and passive outputs |
| Temperature Compensation | Via internal temperature sensor 0.5 °C (± 32.9 °F) accuracy. Level and volume conversion are installed allowing linearisation for tank shapes. |
| PC Interface | All parameters can be accessed and changed through PC Suite software. Echo traces may be viewed on-screen. |
| Options | |
|---|---|
| Option: | Description: |
| Variants | IMP Lite IMP I.S. |
| Configurations | 2-Wire or 3-Wire |
| Beam Angle (-3 dB half power) | IMP3: ‹10° inclusive IMP6: ‹10° inclusive IMP10: ‹10° inclusive |
| Operating Frequency | IMP3: 125 kHz IMP6: 75 kHz IMP10: 41 kHz |
| Measurement Range | IMP3: 0.2 m to 3 m (0.66 ft to 10 ft) IMP6: 0.3 m to 6 m (0.98 ft to 20 ft) IMP10: 0.3 m to 10 m (0.98 ft to 33 ft) |
| Software | IMP PC |
IMP+ BROCHURE
IMP+ DATA SHEET
IMP+ USER'S MANUAL
Related Products
-
Request a QuoteQuick ViewBlackBox 130 Intelligent Level Controlor
- Compact, low-cost, intelligent controllers
- Will operate on all dB transducers up to 40 m (130 ft) range
- Solids, powders, and liquids level measurement
- Analogue output 4-20 mA
- Two control relays
-
Request a QuoteQuick ViewDB Transducers Level, Volume, Flow
- ATEX Zone 1 & 2
- I.S. ATEX Zone 0 options
- Integral temperature compensation
- Narrow Beam Angles
- Standard 2 or 3 core screened cable extensions to 1000 m (3,280 ft)
- Patented DATEM (Digital Adaptive Tracking of Echo Movement) echo processing technology
- FM/FMc Approval
-
Request a QuoteQuick ViewdBI HART Intelligent Transducers
- Self-contained
- Two-wire
- Solids or Liquids applications
- DATEM digital echo processing
- Various Mounting Options
- ATEX Zone 1 standard, Zone 0 optional
- Use standard programming tools or Pulsar’s dedicated PC system
-
Request a QuoteQuick ViewUltra 4
Advanced Ultrasonic, Level, Flow, Volume and Pump Control
- Built-in volume calculations from standard tank shapes or calibration curves
- 8 GB Micro SD Card
- Echo profiles and level trend graphs are shown on the built-in display
- HART option
- RS485 Modbus/Profibus option
- Radar or Ultrasonic measurement technology
- 4 onboard relays assignable by type
- Wall or Fascia Mount
- mA Output
- The ability to measure pump control, flow measurement, and volume measurement in one compact unit
- Quick set up features allow the easy programming of parameters
Â
-
Request a QuoteQuick ViewUltrasonic Level Transmitter ALIT
The series is an compact 2-wire series ultrasonic level meter for continuous non-contact level measurement in liquids and solids.
- Â Level or Distance mode
- Â 4-20 mA, 2 wire output
- Â Continuous non-contact level measurement with compact version
- Â LC Display
-  Exproof version
- Â All metal outer cover ( IP67 ), airproof and alkali-resisting
-
Request a QuoteQuick ViewPSL 5.0 Hybrid Pump Station Level Controller
- Controls, Transmits and Displays
- Non-Contacting Ultrasonic Sensor
- New Dual-Technology Feature- Redundant Level Sensor Input
- 6 Relays for Pump Control, Pump Alternation and Level Alarms
- Isolated 4-20mA output
- Built-in 5-Key Calibrator
- Logs and Displays Relay Run Times
-
Request a QuoteQuick ViewQuantum 2 Pumping Station Controlor
-
Request a QuoteQuick ViewAvocet Sludge Blanket Monitor
- Sediment relative density throughout the tank shown on LCD display.
- Improved efficiency and control of the treatment process
- Warning of biological upset or hydraulic imbalance
- Reduce site operational costs significantly with improved process control.
- Reduced sensor maintenance (air purge cleaning).
- Improves health and safety as no manual readings are needed
-
Request a QuoteQuick ViewOpen Channel Flow & Tank Level Meter OCF 6.1
• Safe, Non-Contact Measurement
• Simple 5-key Configuration
• 4-20mA/0-5V Output
• 26-Million Point Data Logger
• On-Screen Flow Reports
• Password Protected
• Modbus® RTU Optional -
Request a QuoteQuick ViewUltimate Controller
- 2 x 4-20mA inputs (passive or active)
- 2 x isolated mA outputs
- Ethernet
- Camera Port
- Touchscreen Display
- 2 x dB Transducer Inputs
- 8 relays (expandable)
- 8 digital inputs (expandable)
