Electronic Pressure Calibrator PC4
Electronic Pressure Calibrator PC4 with internal pressure source up to 1000 mbar Pressure – Vacuum – Differential Pressure PC4,Electronic Pressure Calibrator is an appliance for verification and calibration of pressure sensors, pressure gauges, as well as pressure switches for low pressures. The combination pressure measuring unit and pressure generator allows a variety of applications in the laboratory as well as in the field.
- Description
- Application Areas
- Specifications
- Brochure
Product Description
Electronic Pressure Calibrator PC4 with internal pressure source up to 1000 mbar Pressure – Vacuum – Differential Pressure PC4,Electronic Pressure Calibrator is an appliance for verification and calibration of pressure sensors, pressure gauges, as well as pressure switches for low pressures. The combination pressure measuring unit and pressure generator allows a variety of applications in the laboratory as well as in the field.
Heating, ventilation, air conditioning, Cleanroom technology, medical technology, Filter technology, Level measurements, Flow-velocity measurements (Pitot tube, orifice blade)
- Measurement principle: Inductive
- Medium: non-aggressive gases
- Wetted parts: Ni, Al, CuBe, PU
- Linearity: 0.2% FS
- Hysteresis: 0.1% max. FS
- Long term stability ±0.5% per year (typical)
- Sensor volume: appr. 3 ml
- Volume increase: appr. 0,2 ml at nominal pressure
- Pump: Displacement volume variable
- Bellows (fine adjustm.): Displacement volume appr. 25 cm³ at 20 crankshaft rotations
- Power supply: 9 V E-Block (Option: plug-in power supply 230 VAC 50/60 Hz)
- Current consumption: appr. 10 mA Protection: 250 mAT
- Supply influence: < 0,05%
- Option: Analogue output 0...1 V (max. load resistance $2 KOhm)
- Display: LCD 3 1/2 digits (12.5 mm); Option: LCD 4 1/2 digits (12.5 mm)
- Response time: Adjustable 0.3 / 1 / 2 Seconds
- Pressure connections: Diameter 6.6 mm x 1 mm (for flexible hose with 6 mm diam.)
- Electrical connections: Power supply jack plugs for optional plug-in power supply 4 mm banana plugs for optional analogue output
- Temperature influence Zeropoint ±0.03% FS / K; Span ±0.03% FS / K
- Temperature ranges: specified range from +10°C to +40°C
- Humidity: up to 80% relative humidity
- Storage temperature: -10°C to +70°C
- Housing: Bench housing in Aluminium 248 mm x 225 mm x 90 mm
- Shock resistance: 1 g Housing colour: Grey, Front green anodized
- Protection class: III
- Degree of protection: IP 30
- Standardisation: EN 50081-1; EN 50081-2; EN 50082-1; EN 50082-2; EN 61010
- Weight: appr. 2 kg
PC4,Electronic Pressure Calibrator Brochure
Related Products
-
Request a QuoteQuick ViewDry Block Temperature Calibrator SOLAR
Dry block Temperature Calibrator Type SOLAR & SOLAR-2ITemperature range: +200°C to +1100°CFor mobile and stationary useMicro processor operatedRamp function, thermostat test -
Request a QuoteQuick ViewDry Block Temperature Calibrator PYROS-125
- Temperature range (at +20°C ambient temperature): -24°C…+125°C
- For 230 VAC and 115 VAC autorange (PYROS-125) resp. switchable
- For mobile use on site and stationary use
- Thermostat test facility
-
Request a QuoteQuick ViewElectronic Pressure Calibrator DFP
- Accuracy: ±0.1% v.E., Pressure ranges up to 2000 bar
- 1 year autonomy without recharging (battery operated)
- Pressure unit “bar”, conversion to Force
- PEAK function (positive and negative)
- Digital Filter (programmable)
- Pressure connection: 1/2″ BSP male
- Clear easy to read LCD display with large number
-
Request a QuoteQuick ViewPortable Fluid Bath FLUID 100/200/200-H
MODELS / Temperature Ranges:FLUID 100: from 10°C to +125°CFLUID 200: from ambient temperature to +200°CFLUID 200-H: from ambient temperature to +220°CMobile and stationary, ramp function, Thermostat testsRecommended for the calibration of glass thermometersOPTIONAL conversion kit to Dry Block temp. calibrator -
Request a QuoteQuick ViewIntelligent Pressure Calibrator AK601B
Technical Specifications:Pressure :-1…0 Bar, 0….600 Bar, Accuracy: 0,05% F.S
Current measurement: 0 …25 mA, Accuracy: ( 0,02%R.D+0,005%F.S)
Voltage measurement: 0 …25 V, Accuracy: ( 0,02%R.D+0,005%F.S)
Temperature compensating range: 0…50 oC
DC output: 24 VDC (<24 mA), Accuracy: 1% F.S.
Power supply: lithium batterypower supplied or special adapterOverall dimensions 171.5mm x 110mm x 44mmWeight: 0,7 kg -
Request a QuoteQuick ViewIntelligent Calibration Module IKM
IKM Intelligent Calibration Module for Deadweight Tester(Pressure Balances)Used in combination with a deadweight tester (pressure balance) to determine the required mass loadsConversion into all common pressure unitsConsideration of the local gravity on-siteConsiders all critical ambient parameters to improve the measuring accuracyEasy calibration of pressure transmitters through integrated voltage supply and multimeter function (optional)Self-sustaining system, PC-independentRetro-fitting possible, for all deadweight tester (pressur balances) available on the market -
Request a QuoteQuick ViewDry Block Temperature Calibrator PYROS-375
- Temperature range (at +20°C ambient temperature): +30°C…+375°
- For 230 VAC and 115 VAC autorange (PYROS-125) resp. switchable
- For mobile use on site and stationary use
- Thermostat test facility
-
Request a QuoteQuick ViewDeadweight Tester LDW 1000
- Deadweight Tester LDW 1000
- Pressure Balance – Primary Standard for Pressure
- Ranges 0.2…60 bar, 1…250 bar, 2…600 bar, 2…1000 bar 2.9…1,000 psi, 14.5…5,000 psi, 29…10,000 psi, 29…15,000 psi
- Accuracy (total uncertainty of measurement) ±0.025% of measured value
- Self-sustaining complete system, also suitable for on-site measurements / calibrations
- Including Certificate of Calibration, traceable to National Standard (optional: DKD certification)
-
Request a QuoteQuick ViewPneumatic Comparator AK673A
- Pressure range : -0,98….60 Bar
- Stability: 0,05% F.S.
- Working media: Air
- Output interface : M20X1,5 female
- Overall dimensions : (LxWxH): 325 x 210 x 170mm
- Weight : 4,5 kg
-
Request a QuoteQuick ViewElectronic Pressure Calibrator LEC 200
Multi-Function Calibrator LEC 200
- Highest accuracy in class up to ±0.015% of reading.
- Source / Read thermocouples (13), RTDs (19; ohms, current, voltage, frequency and pulse trains (only source).
- Isolated mA / V read-back circuit for complete transmitter calibration.
- Programming of setpoints to speed up calibration tasks.
- Entry of custom RTD coefficients.
