Digital Test Manometer LDM70
LDM 70-E25: Accuracy ±0.125% f.s. / LDM 70-K50: Accuracy ± 0.25% f.s.
• Battery powered, rugged, rotatable housing (DS 70 mm)
• 4.5-digit LC display (digit height 11 mm)
• 6-digit additional display to show the selected pressure unit (height 7.5 mm)
• Pressure unit switchable (PSI-bar-mbar-mWs-inHg-cmHg-mmHg-kPa-MPa)
• Easy configuration via three push buttons
• Ingress protection IP 65
• Ranges from 0/1.45 psi to 0/8700 psi ( 0/100 mbar to 0/600 bar)
• MIN and MAX value storage
- Description
- Specifications
- Brochure
- User’s Guide
Product Description
The display is continously rotatable so that a clear readability is garanteed even in unusual installation positions. The LDM 70 can be operated menu-driven via three push-buttons. Besides showing information about the nominal pressure range as well as minimal and maximal pressure of the process, several pressure units (psi, bar, mbar, mWC, inHg, cmHg, mmHg, kPa, MPa) and the position of the decimal point can be set. The instruments zero and span can be calibrated, and the LDM 70 can be set to factory default values via menu.
- Pressure Ranges (see tab. on back page):
Type LDM 70-E25: all standard ranges, gauge pressure, absolute pressure, vacuum and compound ranges
Type LDM 70-K50: all standard ranges 0/1.6 bar to 0/400 bar - Nominal case diameter: DS 70 mm / 27.6 inches
- Accuracy (as per IEC 60770):
Type LDM 70-E25: ±0.25% f.s (ranges # 5.8 psi / 400 mbar: ±0.5% f.s.)
Type LDM 70-K50: ±0.5% f.s. - Measuring rate: 5 per second
- Thermal error (zero-point and span within temperature compensated range):
Type LDM 70-E25: Tolerance band: Ranges ≤ 0.1 bar: ≤± 2.0% f.s.; average TC: ±0.3% f. s. / 10 K
Ranges ≤ 0.25 bar: ≤ ±1.5% f.s.; average TC: ±0.2% f.s. / 10 K
Ranges ≤ 0.4 bar: ≤ 1.0% f.s.; average TC: ±0.14% f.s. / 10 K
Ranges ≤ 1.0 bar: ≤ 0.1% f.s.; average TC: ±0.1% f.s. / 10 K
Ranges >1.0 bar: ≤ ±0.75% f.s.; average TC: ±0.07% f.s. / 10 K
Type LDM 70-K50: ≤ ±0.2% f.s. / 10 K - Temp. compensated range:
Type LDM 70-E25: Ranges ≤ 0.4 bar: 0...50°C; ranges >0,4 bar: 0...70°C
Type LDM 70-K50: -25...+85°C - Permissible temperatures:
Medium: -4/+185°F=-20/85°C
Ambient: -4/+158°F=-20/70°C
Storage: -22/+176°F=-30/80°C - Material display housing: PA 6.6 polycarbonate
- Material pressure port: stainless steel 1.4571 / 1.4435
- Material diaphragm:
Type LDM 70-E25: stainless steel 1.4435
Type LDM 70-K50: ceramic Al2O3 96% - Material seals: wetted seals: FKM (optional: EPDM, NBR, others on request)
- Display: LCD 1.57" x 1.18"= 40 x 30 mm; 4 1/2 digit 7-segment-main display, digit height 11 mm,
Indication range ±19999; 6-digit 14-segment additional display, digit height 7.5 mm - Electromagnetic compatibility: emission and immunity according to EN 61326
- Mechanical stability: vibration: 5 g RMS (20...2000 Hz); shock: 100 g / 11 msec.
- Supply: 3.6 V lithium batteries, 2 pcs. (type 1/2 AA)
- Data memory: EEPROM (non-volatile)
- Ingress protection: IP 65
- Installation position: any (the LDM 70 is calibrated in vertical position with pressure port down. If this position is changed on installation, there can be slight deviations in the zero-point for LDM-70-E25 ranges <1 bar
- Other data: weight 300 g; AD-converter solution: 10 Bit;mech. operational life: > 100 x 106 pressure cycles; battery life: app.. 5 years in standby mode
- Pressure port: 1/2" BSP male, 1/4" BSP male, 1/2" NPT male, 1/4" NPT male
DIGITAL TEST MANOMETER LDM 70 BROCHURE
DIGITAL TEST MANOMETER LDM 70
Related Products
-
Request a QuoteQuick ViewDry Block Temperature Calibrator PYROS-375
- Temperature range (at +20°C ambient temperature): +30°C…+375°
- For 230 VAC and 115 VAC autorange (PYROS-125) resp. switchable
- For mobile use on site and stationary use
- Thermostat test facility
-
Request a QuoteQuick ViewDifferential Pressure Deadweight Tester CPB5000-DP
Differential Pressure Deadweight Tester ( Pressure Balance) CPB5000-DPReal differential pressure calibrationPneumatic ranges: up to 100 bar / 1500 psiHydraulic ranges: up to 1000 bar / 15000 psiAccuracy (total uncertainty): up to ±0.008% of measured valueTester with two piston-/cylinder-units and two weight setsOne spindle pump for generating the static line pressure, another one for generating the differential pressureOptions: DKD certification, IKM intelligent calibration module for automatic calculation of corrections etc -
Request a QuoteQuick ViewElectronic Pressure Calibrators TLDMM-A01 and TLDMM-A02
TLDMM-A01: Digital Test Pressure Gauge ±0.1% f.s.TLDMM-A02: Digital Test Pressure Gauge ±0.2% f.s.Ranges up to 2000 bar available1 year autonomy without recharging (battery operated)Pressure units “bar”, “mbar”, “psi”, “MPa”, “kPa” switcheablePEAK function (positive and negative)Digital Filter (programmable)Pressure connection: 1/2″ BSP maleClear easy to read LCD display with large number -
Request a QuoteQuick ViewPortable Fluid Bath FLUID 100/200/200-H
MODELS / Temperature Ranges:FLUID 100: from 10°C to +125°CFLUID 200: from ambient temperature to +200°CFLUID 200-H: from ambient temperature to +220°CMobile and stationary, ramp function, Thermostat testsRecommended for the calibration of glass thermometersOPTIONAL conversion kit to Dry Block temp. calibrator -
Request a QuoteQuick ViewDeadweight Tester LDW 1000
- Deadweight Tester LDW 1000
- Pressure Balance – Primary Standard for Pressure
- Ranges 0.2…60 bar, 1…250 bar, 2…600 bar, 2…1000 bar 2.9…1,000 psi, 14.5…5,000 psi, 29…10,000 psi, 29…15,000 psi
- Accuracy (total uncertainty of measurement) ±0.025% of measured value
- Self-sustaining complete system, also suitable for on-site measurements / calibrations
- Including Certificate of Calibration, traceable to National Standard (optional: DKD certification)
-
Request a QuoteQuick ViewDry Block Temperature Calibrator PULSAR-80CU
Dry block Temperature Calibrator Type PULSAR-80CUTemperature range: ambient temperature up to +550°CFor mobile and stationary useMicro processor operated, ramp function, thermostat tests -
Request a QuoteQuick ViewDry Block Temperature Calibrator PYROS-650
- Temperature range (at +20°C ambient temperature): +35°C…+650°C
- For 230 VAC and 115 VAC autorange (PYROS-125) resp. switchable
- For mobile use on site and stationary use
- Thermostat test facility
-
Request a QuoteQuick ViewElectronic Pressure Calibrator PC4
Electronic Pressure Calibrator PC4 with internal pressure source up to 1000 mbar Pressure – Vacuum – Differential Pressure PC4,Electronic Pressure Calibrator is an appliance for verification and calibration of pressure sensors, pressure gauges, as well as pressure switches for low pressures. The combination pressure measuring unit and pressure generator allows a variety of applications in the laboratory as well as in the field.
-
Request a QuoteQuick ViewDry Block Temperature Calibrator SOLAR
Dry block Temperature Calibrator Type SOLAR & SOLAR-2ITemperature range: +200°C to +1100°CFor mobile and stationary useMicro processor operatedRamp function, thermostat test -
Request a QuoteQuick ViewIntelligent Calibration Module IKM
IKM Intelligent Calibration Module for Deadweight Tester(Pressure Balances)Used in combination with a deadweight tester (pressure balance) to determine the required mass loadsConversion into all common pressure unitsConsideration of the local gravity on-siteConsiders all critical ambient parameters to improve the measuring accuracyEasy calibration of pressure transmitters through integrated voltage supply and multimeter function (optional)Self-sustaining system, PC-independentRetro-fitting possible, for all deadweight tester (pressur balances) available on the market
