Smart Pressure Transmitter APC-2000 ALW

Smart Pressure Transmitter APC-2000 ALW

  • 4…20 mA, 0…20 mA or 0…5 mA output signal + HART protocol
  • Digital PROFIBUS PA signal
  • Display with backlight
  • Programmable range, zero shift, characteristic and damping ratio with local panel keys
  • SIL 2 certificate
  • Intrinsic safety certificate (ATEX, IECEx)
  • Explosion proof certificate (ATEX, IECEx)
  • Marine certificate – DNV, BV
  • PED Conformity (97/23/EC)
  • Accuracy 0,075% (0,05% on request)
  • Gold plated diaphragm (Au)
  • Description
  • Brochure
  • User’s Guide

Product Description

  • 4…20 mA, 0…20 mA or 0…5 mA output signal + HART protocol
  • Digital PROFIBUS PA signal
  • Display with backlight
  • Programmable range, zero shift, characteristic and damping ratio with local panel keys
  • SIL 2 certificate
  • Intrinsic safety certificate (ATEX, IECEx)
  • Explosion proof certificate (ATEX, IECEx)
  • Marine certificate – DNV, BV
  • PED Conformity (97/23/EC)
  • Accuracy 0,075% (0,05% on request)
  • Gold plated diaphragm (Au)
  • MID (Measuring Instruments Directive) – certificate acc. to 2004/22/WE directive and OIML R140:2007 recommendations

The smart pressure transmitter APC-2000 ALW is applicable to the measurement of the pressure, under-pressure and absolute pressure of gases, vapors and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. The casing is made of aluminium alloy cast or 316 SS stainless steel, degree of protection IP 66/IP 67. The design of the casing enables the use of a local display, rotation of the display, rotation of the casing by 0–340° relative to the sensor, and a choice of cable direction.

The smart pressure transmitter APC-2000 ALW is designed to measure gauge pressure, vacuum pressure and absolute pressure of gases, vapors and liquids (including corrosive substances).The smart pressure transmitter APC-2000 ALW can be fitted with a series of diverse process connectors, and also, when application so requires, they can be installed with direct or spaced demisters, which allows using them with various measured media, such as dense media or aggressive media, at high and low temperatures.

The smart pressure transmitter APC-2000 ALW generates output signal 4…20mA (20…4mA in inversion system), in double-duct arrangement. Transmitters can be configured following their installation at the workplace. Due to application of “smart” electronics the following settings are available: beginning and end of measurement range, attenuation, elemental processing characteristics, low (LO) and high (HI) level of basic alert. Transmitters can be configured using communicator KAP03 (APLISENS), some other HART communicators or PC computer with HART/RS232 converter and “REPORT–02” software.

 

Smart Pressure Transmitter APC-2000ALW Brochure

Smart Pressure Transmitter APC-2000ALW User Guide