Sealing Wedges TK
Sealing wedges are used to seal cracks and smole holes from safe distance. Can be operated by one person only. They are applied mainly on broken tanks, cisterns, barrels and pipes.
- Description
- Specifications
- Brochure
Product Description
Sealing wedges are used to seal cracks and smole holes from safe distance. Can be operated by one person only. They are applied mainly on broken tanks, cisterns, barrels and pipes.
| Type | TK 6/5 | TK 8/5,5 | TK 11/7 | TK 7,5 | |
|---|---|---|---|---|---|
| Part - No | 1906 | 1904 | 1907 | 1903 | |
| Dimensions | mm | 230 x 60 x 50 | 230 x 80 x 55 | 230 x 110 x 70 | 75 |
| Sealing area | mm | 15–45/60–80 | 15–45/80–110 | 30–60/110–170 | 30-90 |
| Operation pressure | bar | 1,5 | 1,5 | 1,5 | 1,5 |
| Weight | kg | 0,4 | 0,5 | 0,6 | 0,4 |
TECHNICAL DOCUMENT
Related Products
-
Request a QuoteQuick ViewDoppler Flow Switch DFS 5.1
- Flow Control from the Outside of Metal or Plastic Pipes
- 5 amp DPDT Control Relay
- Adjustable ON/OFF Set-Points
- Hi or Lo Flow Alarm Mode
- Adjustable Time Delay
- Relay Status LED
- Flow Rate LED bargraph
-
Request a QuoteQuick ViewUltrasonic Slurry Flowmeter SFM 6.1
- Optimized for Slurries
- Easy, Intuitive Set-Up
- 5 Button Menu System
- Isolated 4-20mA Output
- Up to 6 Control Relays
- Optional Built In Data Logger
-
Request a QuoteQuick ViewDoppler Ultrasonic Flowmeter DFM 5.1
- User-Friendly Calibration
- Password Protected
- Isolated 4-20mA Output
- 2 Control Relays
- Digital Signal Processing
- Optional Intrinsic Safety
-
Request a QuoteQuick ViewHigh Pressure Pipe Stoppers UU
If the standard sealing pipe stoppers cannot be used due to high back pressure, these high-pressure pipe stoppers are recommendable.
-
Request a QuoteQuick ViewArea-Velocity Flow Monitor AVFM 6.1
- No flume or weir required – submersible ultrasonic sensor measures velocity and level simultaneously to calculate flow. No moving parts to wear, foul, or clog.
- Built-in 5-button keypad, intuitive menu, and large backlit LCD display make the AVFM 6.1 the most operator-friendly area velocity flow meter on the market.
- Fast, simple, installation and setup.
- Improved performance in a wider range of operating conditions.
- At a glance, view flow rate, velocity, level, totalizer, relay status, and important diagnostic information on the LCD display.
- Three isolated 4-20mA outputs for flow rate, velocity, and level, and two relay outputs for pulse output or alarm.
- 6.5 million point data logger for greater flexibility of data monitoring, control, and reporting.
- Min, Max, and Total Flow data from the last 365 days is available on the LCD display, or download directly to a USB for easy reporting.
- Monitors flow rate, volume total, run hours, and diagnostic information through only two wires with the optional Modbus RTU serial communication output.
-
Request a QuoteQuick ViewMantaRay Portable Area-Velocity Flow Meter
- Measures flow in partially filled pipes and open channels
- No flume or weir required
- 4-20mA and Relay outputs for connection to Samplers and SCADA
- Powered with built-in rechargeable NiMH batteries
- 2 million point data logger with USB output to Flash drives
- Backlit LCD display for flow rate, totalizer and menu system
-
Request a QuoteQuick ViewEgg Shaped Test Pipe Stoppers PUV, PUV-F, PUVP
These pipe stoppers are used for sealing of egg-shaped sections.
-
Request a QuoteQuick ViewMechanical Flow Meter Wafer Serie
Direct reading Flow Rate Indication
Optional (field adjustable) switch(es)
Optional Non-Contact 4-20mA Output
High Pressure available
Mounts in any orientation
No straight Pipe Run required • Connection sizes from 3” to 12” -
Request a QuoteQuick ViewMechanical Flow Meter Low Flow
-Water, De-Ionised Water
-Soluble Oils (Glycols)
-Petroleum Based Fluids
-Synthetic Based Fluids Coolants
-Corrosive Fluids Paints Solvents
-Air & Gases -
Request a QuoteQuick ViewMechanical Flow Meter Small Serie
