Mechanical Flow Meter Wafer Serie
Direct reading Flow Rate Indication
Optional (field adjustable) switch(es)
Optional Non-Contact 4-20mA Output
High Pressure available
Mounts in any orientation
No straight Pipe Run required • Connection sizes from 3” to 12”
- Description
- Application Areas
- Specifications
- Brochure
- User’s Guide
Product Description
A scaled dial and mechanical indicator continuously monitor the flow rate at any given time whilst electrical switches can be specified to signal when a particular level has been reached during increasing or decreasing flow rates.
Style; Through its unique modular design it allows for easy field installation and service. It does not require any straight pipe runs before or after the monitor thus minimizing the installation footprint. The versatile design of the vane monitor allows for orientation to be mounted in any position. Vane style monitor operates when flow is introduced through the inlet connection making direct contact with the vane that is mechanically linked to the indicator shaft, the fluid forces the vane to open. The vane style monitor is spring loaded and allows the vane to return on decreasing flows.
Sizes : from DN80 to DN 300
Water
De-Ionised Water
Soluble Oils (Glycols)
Petroleum Based Fluids
Synthetic Based Fluids
Coolants
Corrosive Fluids
Paints,Solvents
Air & Gases
Switches; Are field adjustable, suitable for batching, trending, totalising or recording where required. All Flow-Mon units can be supplied with a 0-10v or 4-20mA output.
Sizes; All sizes are manufactured to the same simple design concept, the main characteristic of which ensures that the pressure drops are confined to an absolute minimum across the vane orifice at full flow, with viscosities as high as 600cS. Sizes are defined by pipe size and/or maximum flow capacity, and every flow switch is individually calibrated so that full scale deflection is used in each application i.e. the maximum scale reading coincides with the maximum requirements of system as specified by the customer. Calibration may be in any units with Single or Dual scale to specification
Brochure
Datasheet
Mechanical Flow Meter Wafer serie
Related Products
-
Request a QuoteQuick ViewMechanical Flow Meter Small Serie
-
Request a QuoteQuick ViewSandwich Type Ultrasonic Water Meter TFMW-1
Sandwich Insertion Ultrasonic Water Meter is a new style water meter specially designed for agricultural irrigation, Garden Management and water resource supervision.
Advantages of this water meter ;
Low cost, high accuracy, low power consumption, stability and reliability.
1 inch thickness of the meter helps to save installation space, and parts to achieve IP 68, enable the water works in any severe environment .
Due to unique design, there will be no pressure loss and different water medium will have no influence on measurement
Analog, Digital outputs and RS485
-
Request a QuoteQuick ViewDoppler Flow Switch DFS 5.1
- Flow Control from the Outside of Metal or Plastic Pipes
- 5 amp DPDT Control Relay
- Adjustable ON/OFF Set-Points
- Hi or Lo Flow Alarm Mode
- Adjustable Time Delay
- Relay Status LED
- Flow Rate LED bargraph
-
Request a QuoteQuick ViewMantaRay Portable Area-Velocity Flow Meter
- Measures flow in partially filled pipes and open channels
- No flume or weir required
- 4-20mA and Relay outputs for connection to Samplers and SCADA
- Powered with built-in rechargeable NiMH batteries
- 2 million point data logger with USB output to Flash drives
- Backlit LCD display for flow rate, totalizer and menu system
-
Request a QuoteQuick ViewUltrasonic Slurry Flowmeter SFM 6.1
- Optimized for Slurries
- Easy, Intuitive Set-Up
- 5 Button Menu System
- Isolated 4-20mA Output
- Up to 6 Control Relays
- Optional Built In Data Logger
-
Request a QuoteQuick ViewFlow Indicator Spinner
• Suitable for water and other clear liquids and gases
• 16 bar pressure and 200˚C temperature capability
• Precision moulded glass dome with yellow PPS plastic spinner
• Can be used in any orientation
• Bi-directional flow
• Operates over a wide flow range -
Request a QuoteQuick ViewArea-Velocity Flow Monitor AVFM 6.1
- No flume or weir required – submersible ultrasonic sensor measures velocity and level simultaneously to calculate flow. No moving parts to wear, foul, or clog.
- Built-in 5-button keypad, intuitive menu, and large backlit LCD display make the AVFM 6.1 the most operator-friendly area velocity flow meter on the market.
- Fast, simple, installation and setup.
- Improved performance in a wider range of operating conditions.
- At a glance, view flow rate, velocity, level, totalizer, relay status, and important diagnostic information on the LCD display.
- Three isolated 4-20mA outputs for flow rate, velocity, and level, and two relay outputs for pulse output or alarm.
- 6.5 million point data logger for greater flexibility of data monitoring, control, and reporting.
- Min, Max, and Total Flow data from the last 365 days is available on the LCD display, or download directly to a USB for easy reporting.
- Monitors flow rate, volume total, run hours, and diagnostic information through only two wires with the optional Modbus RTU serial communication output.
-
Request a QuoteQuick ViewMechanical Flow Meter Low Flow
-Water, De-Ionised Water
-Soluble Oils (Glycols)
-Petroleum Based Fluids
-Synthetic Based Fluids Coolants
-Corrosive Fluids Paints Solvents
-Air & Gases -
Request a QuoteQuick ViewStingray 2.0 Portable Level-Velocity Logger
- Measures water level and velocity in partially filled pipes and open channels
- No flume or weir required
- Extreme low power consumption Uses standard Alkaline D-cell batteries
- 130,000 point data logger
- USB output
- Powerful Windows software
- LCD bar graph display
-
Request a QuoteQuick ViewEgg Shaped Test Pipe Stoppers PUV, PUV-F, PUVP
These pipe stoppers are used for sealing of egg-shaped sections.
