LSP 1000-EB, Pressure Comparison Pump
Pressure source for calibration purposes
Operating fluid: mineral oil based hydraulic fluid or clean water, free of calcium-carbonate / scale)
When the device under test and a reference measuring instrument with an adequate accuracy are connected to the test pump, the same pressure will act on both measuring instruments after actuating the pump. A calibration or an adjustment can be carried out by comparing the two measured values at any pressure value.
- Description
- Application Areas
- Brochure
- User’s Guide
Product Description
Pressure comparison pumps are used for generating pressure for the testing, adjusting and calibrating of mechanical and electronic pressure measuring instruments by means of comparison measurements.
Pressure comparison pumps are used for generating pressure for the testing, adjusting and calibrating of mechanical and electronic pressure measuring instruments by means of comparison measurements.
LSP 1000-EB, PRESSURE COMPARISON PUMP BROCHURE
LSP 1000-EB, PRESSURE COMPARISON PUMP USER GUIDE
Related Products
-
Request a QuoteQuick ViewDifferential Pressure Deadweight Tester CPB5000-DP
Differential Pressure Deadweight Tester ( Pressure Balance) CPB5000-DPReal differential pressure calibrationPneumatic ranges: up to 100 bar / 1500 psiHydraulic ranges: up to 1000 bar / 15000 psiAccuracy (total uncertainty): up to ±0.008% of measured valueTester with two piston-/cylinder-units and two weight setsOne spindle pump for generating the static line pressure, another one for generating the differential pressureOptions: DKD certification, IKM intelligent calibration module for automatic calculation of corrections etc -
Request a QuoteQuick ViewDry Block Temperature Calibrator PYROS-125
- Temperature range (at +20°C ambient temperature): -24°C…+125°C
- For 230 VAC and 115 VAC autorange (PYROS-125) resp. switchable
- For mobile use on site and stationary use
- Thermostat test facility
-
Request a QuoteQuick ViewDry Block Temperature Calibrator PULSAR-35CU
Dry Block Temperature Calibrator PULSAR-35CUfor mobile or stationary usemicro processor operated (PID)ramp function, thermostat test -
Request a QuoteQuick ViewIntelligent Calibration Module IKM
IKM Intelligent Calibration Module for Deadweight Tester(Pressure Balances)Used in combination with a deadweight tester (pressure balance) to determine the required mass loadsConversion into all common pressure unitsConsideration of the local gravity on-siteConsiders all critical ambient parameters to improve the measuring accuracyEasy calibration of pressure transmitters through integrated voltage supply and multimeter function (optional)Self-sustaining system, PC-independentRetro-fitting possible, for all deadweight tester (pressur balances) available on the market -
Request a QuoteQuick ViewDry Block Temperature Calibrator PULSAR-80CU
Dry block Temperature Calibrator Type PULSAR-80CUTemperature range: ambient temperature up to +550°CFor mobile and stationary useMicro processor operated, ramp function, thermostat tests -
Request a QuoteQuick ViewElectronic Pressure Calibrator LEC 200
Multi-Function Calibrator LEC 200
- Highest accuracy in class up to ±0.015% of reading.
- Source / Read thermocouples (13), RTDs (19; ohms, current, voltage, frequency and pulse trains (only source).
- Isolated mA / V read-back circuit for complete transmitter calibration.
- Programming of setpoints to speed up calibration tasks.
- Entry of custom RTD coefficients.
-
Request a QuoteQuick ViewDeadweight Tester LDW 1000
- Deadweight Tester LDW 1000
- Pressure Balance – Primary Standard for Pressure
- Ranges 0.2…60 bar, 1…250 bar, 2…600 bar, 2…1000 bar 2.9…1,000 psi, 14.5…5,000 psi, 29…10,000 psi, 29…15,000 psi
- Accuracy (total uncertainty of measurement) ±0.025% of measured value
- Self-sustaining complete system, also suitable for on-site measurements / calibrations
- Including Certificate of Calibration, traceable to National Standard (optional: DKD certification)
-
Request a QuoteQuick ViewElectronic Pressure Calibrator TLDMM
Digital Reference Pressure Indicator Type TLDMM (electronic Pressure Calibrator)
- Accuracy: ±0.05% v.E., Ranges up to 2000 bar available
- 1 year autonomy without recharging (battery operated)
- Pressure units “bar”, “mbar”, “psi”, “MPa”, “kPa” switcheable
- PEAK function (positive and negative)
- Digital Filter (programmable)
- Pressure connection: 1/2″ BSP male
- Clear easy to read LCD display with large numbers
- Including S.I.T. Calibration Certificate (similar to DKD cert.)
-
Request a QuoteQuick ViewPortable Fluid Bath FLUID 100/200/200-H
MODELS / Temperature Ranges:FLUID 100: from 10°C to +125°CFLUID 200: from ambient temperature to +200°CFLUID 200-H: from ambient temperature to +220°CMobile and stationary, ramp function, Thermostat testsRecommended for the calibration of glass thermometersOPTIONAL conversion kit to Dry Block temp. calibrator -
Request a QuoteQuick ViewElectronic Pressure Calibrator DFP
- Accuracy: ±0.1% v.E., Pressure ranges up to 2000 bar
- 1 year autonomy without recharging (battery operated)
- Pressure unit “bar”, conversion to Force
- PEAK function (positive and negative)
- Digital Filter (programmable)
- Pressure connection: 1/2″ BSP male
- Clear easy to read LCD display with large number
