Hydrocell Waste Water Sampler

Hydrocell Waste Water Sampler

Hydrocell Waste Water Sampler is specifically designed for Composite Collection of (flow/time proportional) samples of trade effluent discharges in industrial applications. A robust industrial design with state of the art touch screen programming and display makes the Hydrocell the product of choice for all your waste water sampling needs.

  • Description
  • Specifications
  • Brochure
  • User’s Guide

Product Description

Hydrocell Waste Water Sampler is specifically designed for Composite Collection of (flow/time proportional) samples of trade effluent discharges in industrial applications. A robust industrial design with state of the art touch screen programming and display makes the Hydrocell the product of choice for all your waste water sampling needs.

Composite Sampler

Hydrocell Waste Water Sampler has been designed with the trade effluent industry in mind. Hydrocell Waste Water Sampler is available in non-refrigerated wall mounted single bottle and floor standing twin bottle versions whilst the refrigerated version is available in 4 or 8 bottle versions. Ten litre wide mouth carboy bottles are used in all versions except the eight bottle sampler which comes with wide mouth 4 litre bottles.

Models

  • Hydrocell 2: 2 Bottle Non-Refrigerated
  • Hydrocell 4: Touch Screen or Remote Keypad via USB Port
  • Bottles: 10 Litre LDPE Standard or PP (Optional)

User Interface

  • Display: 7 inch (800 x 480 pixels) full colour graphical displaywith anti-glare cover
  • Programming: Touch screen (optional wireless keypad)
  • Operating system: Windows CE 6.0 R3 (licence included)
  • Enclosure rating: IP65
  • Logging: 2GB SD card records sampling events, alarm conditions, pump starts, pumped volume, and configuration.

Performance

  • Processors: Processors Dual Processors with SPARTAN3AN FPGA and ARM11 based CPU
  • Logger: 512MB NAND Flash plus Internal SD Card.Records Sampling Events, Alarm Conditions, Pump Starts, Pumped Volume, Configuration
  • Electronics Operating Temperature Range: -20 to +70 oC

Software

  • Modes: Fully user programmable for calibration volume, line purge,start bottle, bottle sequence, continuous or fixed cycle,sample interval, refrigeration temperature
  • Display features: Graphical display of bottle filling action, current fill status, alarm conditions,spot sampling
  • Engineering: Password protected engineering mode for diagnostics, testing, and software upgrades

Power

  • Supply (AC): 85-240V 3.15A AC
  • Supply (DC): 24V 12A DC

Pump

  • Media source suitability: Wastewater from non-pressurised submersed sampling point
  • Type: Peristaltic with 24Vdc motor
  • Pump tube: Thick walled marprene tube, 8mm internal diameter
  • Intake tube: Braided LDPE up to 40m length
  • Maximum lift: 7metres (23 feet)
  • Repeatability: Typically±5 ml (this will vary depending on the density of liquid)

Control

  • Timed sample trigger: Pulsed input / 4-20mA input / contact closure, fully user programmable
  • Time based: Fully user programmable

Outputs and Communucations

  • Alarms: 2 x User programmable SPCO rated at 5A@ 230Vac
  • Digital: 2 x USB, 1 x Etherne

Hydrocell Waste Water Sampler Brochure

Hydrocell Waste Water Sampler User Guide