Electromagnetic Flow Meter MAGS1
- Auto-diagnostics
- ±0.2% accuracy
- Cable length up to 500m
- Description
- Application Areas
- Specifications
- Brochure
- User’s Guide
Product Description
MAGS1 is a stand-alone version flowmeter, which does not need a transmitter and can be operated on its own.
If you need a low cost flowmeter without a read out on a display and outputs, this will be the right one.
Inexpensive solution for application with existing PLC System with RS485 Modbus RTU communication system.
No display; fully operational electromagnetic flowmeter. Cost-effective solution for installations where local display is not needed.
Water & Wastewater - distribution networks, irrigation, sludge/sewage, water treatment, desalination, marine, checking of pumps and water wells
Petrochemical/chemicals/sanitary - corrosive liquids, dosing of additives, chemicals, industrial water, waste water, potable water metering, food, pharmaceutical industry, medium and high density fluids, blending
Paper & Pulp - additives, bleaches, colorants, liquor
Power supply 24VDC ± 10% @ 0.5A max
Communication RS485 - Modbus RTU
Min. media electrical conductivity ≥5µS/cm, ≥20µS/cm for demineralized water
Flow range 0.1 to 10 m/s
Accuracy ±0.2% (0.5 to 10m/s) of actual value
Connection types DIN, ANSI, JIS flanged. Other types on request
Flange material Steel 1.0036 or higher, Dimensions acc. to DIN EN 1092-1, ASME B 16.5, JIS B 2239
Nominal size 25 – 250 mm (1”-10”)
Maximum nominal pressure PN40/300 psi
Max. media temperature 70°C (158°F) for Hard Rubber liner, 130°C (266°F) for PTFE liner Ambient temperature -20 to 60°C (-4 to 140°F)
Sensor protection IP68 (Nema 6), IP67 (Nema 5)
Liner Hard Rubber, PTFE, other material on request
Electrodes CrNi (Stainless) steel 1.4571 / 316Ti, other materials on request
Measuring tube Stainless steel 1.4301 dimensions according to EN 10027-2
Outer casing Carbon steel (1.0036) as standard External coating Lacquered finish (anticorrosive) Accessories options Earthing rings for plastic and lined pipes
Coils resistance 80/100 ohm
Other features:
Earthing through 3rd and 4th electrode
Automatic electrode cleaning
Empty pipe detection
Auto-diagnostics Test of excitation coils
Zero flow adjusting
Mag S1 brochure
Mags1 Brochure
Mag S1 electromagnetic flow meter user guide
Mag S1 electromagnetic flow meter user guide
Related Products
-
Request a QuoteQuick ViewElectromagnetic Flow Meter MAGX2
MAGX2 offers a wide range of modules to allow each customer to “design” their own solution for his application. The modules are “plug and play”, can be easily installed or removed from the mother board (always check first that the unit is powered off) and have in most of the cases the size of a big post stamp.
Arkon modules are divided in:
- Power supply modules.
- Output modules.
- Digital communication modules.
-
Request a QuoteQuick ViewDifferential Level Transmitter DLT2.0
Measures Level, Differential Level and Open Channel Flow
Two Non-Contacting Ultrasonic Sensors
Large White Backlit LCD Display
Three Isolated 4-20mA Outputs
Built-in 5-Key Calibration
2 Programmable Control Relays
Optional 2 Million Point Data Logger
Optional Intrinsically Safe Sensors -
Request a QuoteQuick ViewMechanical Flow Meter Small Serie
-
Request a QuoteQuick ViewElectromagnetic Flow Meter MAGB1
- Battery powered electromagnetic flowmeter Battery life up to 10 years
- Accuracy: ± 0.5% of actual value (DN20 – DN150)
- Empty pipe detection
- Automatically turns off the excitation to prolong battery life
-
Request a QuoteQuick ViewDoppler Flow Switch DFS 5.1
- Flow Control from the Outside of Metal or Plastic Pipes
- 5 amp DPDT Control Relay
- Adjustable ON/OFF Set-Points
- Hi or Lo Flow Alarm Mode
- Adjustable Time Delay
- Relay Status LED
- Flow Rate LED bargraph
-
Request a QuoteQuick ViewTelemetry Solutions
- Remotely access measurement data any time you want via your laptop, PC, or mobile device with the power of LTE CAT M1 / NB-IoT connectivity.
- Automatically store measurement data in the cloud for viewing or reporting and configure alerts for you or your operators in case measurements go outside “normal” levels.
- Save time and money by being able to view how your measurement systems are operating without needing to be where the devices are installed.
- Have an infrastructure-independent measurement solution perfect for remote locations. The RANGER is battery-operated and provides power to 2-wire sensors for making measurements. Or, combine the Ranger with a meter that can be powered by 12 VDC and power your measurement solution with a battery and solar combo.
-
Request a QuoteQuick ViewUSI Level Meter
- Display 7.0″ High Resolution Full Colour TFT LCD Graphics Display 800×480 Anti-Glare
- Touch Screen or Remote Keypad via USB Port Windows CE 6.0 R3 (licence included)
- 3×4.20MA Inputs & 2 Isolated Outputs (0.1% resolution) or 0-20mA User Programmable (0.1% resolution)
- Standard Ethernet,
- 8 x RS485, RTU and ASCII, Baudrate: 9600 or 19200, Parity: None, Even or Odd, Databits: 8, StopBits: 1 2xUSB External 1xUSB Internal
- 6 User Programmable SPCO Rated at 16A @230VAC
-
Request a QuoteQuick ViewOpen Channel Flow Monitor OCF 5.0
- Non-Contacting Ultrasonic Sensor
- Large, Backlit LCD Display
- 12-Digit Totalizer
- Reverse Flow Measurement
- Isolated 4-20mA (1000 ohm)
- 2 Programmable Control Relays
- Automatic Sensitivity Adjustment
- Built-in 5-Key Calibrator
- Optional 2 million point Data Logger with USB output to Flash memory
-
Request a QuoteQuick ViewPortable Doppler Flow Meter PDFM 5.1
- Clamp-on Ultrasonic Transducer
- Handheld Meter with large backlit LCD Display and Totalizer
- Internal Battery and/or AC Powered
- Built-in 5-Key Calibrator
- 300,000 point Data Logger
- USB Output and Windows software
- 4-20mA Output
- Rugged, watertight Carry Case
-
Request a QuoteQuick ViewAgrimag
- User friendly low cost flowmeter
- 6x AA Battery powered
- No moving parts
- Fast and easy pipe connection
