Pressure

  • Smart Pressure Transmitter PCE-28.Smart

    • Measuring range: min. 0 … 5 mbar; max. 0… 1000 bar
    • Output signal: 4…20 mA + protocol HART
    • Accuracy: 0,1% (0,075%)
    • Marine certificate – DNV, BV
  • Threaded seals with flush diaphragm and radiator S-Rc

    S-Rc diaphragm seals are applicable to measurement of hot, viscous, solidifying or contaminated liquids, in any cases where an impulse line cannot be used.

  • Sanitary Diaphragm Seal S-Sanit

    The both S-DIN and S-Clamp types of sanitary diaphragm seals can be used under aseptic conditions. They are typically applied to measure the pressure of media in the food and pharmaceutical industries.

  • Threaded Seals with Large Diaphragm S-Mazut

    Threaded Seals with Large Diaphragm S-Mazut is applicable to measurement of viscous liquids, at temperatures up to 150°C (300°C when remote diaphragm seal is used)

  • Threaded Chemical Seals with Large Diaphragm

    • Memeasurement the pressure of hydrochloric, sulphuric and nitric acids in any concentration
    • Measurement the pressure of chlorine
  • Threaded Seals with Large Diaphragm and Separable Mounting Part

    S-Comp diaphragm seals have a large separating diaphragm (Ø70) while retaining a compact economic overall design. Benefits of S-Comp diaphragm seals include:

    – the ability to take measurements within a narrow range;

    – simplicity of assembly

  • Chemical Flanged Seals with Flush Diaphragm S-Ch

    The material of both diaphragms and contact faces for the chemical-resistant diaphragm seals is corrosion-resistant, considering the chemical composition of medium as well as its expected concentration range and temperature range.

  • Flanged Seals with Extended Diaphragm S-T

    The flanged diaphragm seal with extended diaphragm is typically applied to measure the pressure or level of the media in a multi-walled tank, where the separating diaphragm should be placed close to the inner wall of the tank.

  • Flanged Seals with Flush Diaphragm S-P

    Flanged Seals with Flush Diaphragm S-P is a pressure-transmitting, diaphragm-type device. The pressure signal is sent to the cooperating pressure measuring device (pressure transmitter, pressure gauge) through manometric liquid filling the space between the separating diaphragm of the seal and the pressure measuring device.

  • Smart Pressure Transmitter APC-2000 ALW

    • 4…20 mA, 0…20 mA or 0…5 mA output signal + HART protocol
    • Digital PROFIBUS PA signal
    • Display with backlight
    • Programmable range, zero shift, characteristic and damping ratio with local panel keys
    • SIL 2 certificate
    • Intrinsic safety certificate (ATEX, IECEx)
    • Explosion proof certificate (ATEX, IECEx)
    • Marine certificate – DNV, BV
    • PED Conformity (97/23/EC)
    • Accuracy 0,075% (0,05% on request)
    • Gold plated diaphragm (Au)
  • Pressure Transmitter AS

    • Potentiometers for zero and span adjustment
    • Accuracy 0,4%
    • Measuring ranges: 0 ÷ 1; 0 ÷ 2,5; 0 ÷ 6; 0 ÷ 10; 0 ÷ 16; 0 ÷ 25
    • Output signal 4 ÷ 20 mA or 0 ÷ 10 V
    • Process connection 1/2”NPTM, G1/2″, M20×1.5, RG or RM
  • Pressure Transmitter PCE-28

    • Any range from 0…25 mbar up to 0…1000 bar
    • 4 ÷ 20 mA two-wire or 0 ÷ 10 V output
    • Intrinsic safety certificate (ATEX, IECEx)
    • Low-voltage version with ATEX and IECEx certificate (model PC-29A, PC-29B)
    • Marine certificate – DNV, BV
    • Communication protocol Modbus RTU
    • Gold plated diaphragm
    • SIL 1 certificate
    • Version with local display