-
Request a QuoteQuick View
DB Transducers Level, Volume, Flow
- ATEX Zone 1 & 2
- I.S. ATEX Zone 0 options
- Integral temperature compensation
- Narrow Beam Angles
- Standard 2 or 3 core screened cable extensions to 1000 m (3,280 ft)
- Patented DATEM (Digital Adaptive Tracking of Echo Movement) echo processing technology
- FM/FMc Approval
-
Request a QuoteQuick View
dBI HART Intelligent Transducers
- Self-contained
- Two-wire
- Solids or Liquids applications
- DATEM digital echo processing
- Various Mounting Options
- ATEX Zone 1 standard, Zone 0 optional
- Use standard programming tools or Pulsar’s dedicated PC system
-
Request a QuoteQuick View
dBI Profibus Transducer
- Self-contained
- Two-wire
- Solids or liquids applications
- Various Mounting options
- ATEX Approvals
- DATEM digital echo processing software
- Uses the standard programming tools on our dedicated PC system
-
Request a QuoteQuick View
IMP + I.S Ultrasonic Level Sensor
- Compact and self-contained level measurement
- Simple menu led setup
- High power and narrow beam angles
- High specification ATEX
- Up to 10 m (33 ft) range available
-
Request a QuoteQuick View
IMP LITE Ultrasonic Level Sensor
- Compact self-contained level measurement
- 2-wire configuration
- RJ11 port
- Up to 10 m (33 ft) range available
-
Request a QuoteQuick View
IMP+ Ultrasonic Level Transmitter
- Compact self-contained level measurement
- Calibrate without compromising the IP67 rating
- Simple menu led set-up
- High power and narrow beam angles
-
Request a QuoteQuick View
Open Channel Flow & Tank Level Meter OCF 6.1
• Safe, Non-Contact Measurement
• Simple 5-key Configuration
• 4-20mA/0-5V Output
• 26-Million Point Data Logger
• On-Screen Flow Reports
• Password Protected
• Modbus® RTU Optional -
Request a QuoteQuick View
Quantum 2 Pumping Station Controlor
-
Request a QuoteQuick View
Quantum 3 Pump Station Controller
- FlowPulse is able to be connected to either a pump, a main outlet, or stand-alone measurement
- 24 V DC output supply capable of supplying 4 FlowPulse units
- ‘Burst and Block’ now based on real flow
- The auxiliary display can now cycle through each FlowPulse and display real flow
- Totalizer sums real throughput rather than deriving from level measurement
- Storm detection alarm
- NRV leakage alarm
- Time to spill calculation
- Resets tripped pumps
- RS485 Modbus and Profibus DV V0 and V1 options
- Pump efficiency alarm function
- Peak power tariff avoidance
- The unit can also be configured using Pulsar PC Suite Software
-
Request a QuoteQuick View
Sludge Finder 2
- Continuous single or dual-channel level control
- High frequency gives high-reliability long term
- Self-cleaning transducer removes the need for regular inspection
- SBR tank applications can be monitored
- Easy set-up via the drop-down menu on large clear display
- The unit can track two different echoes with one transducer
- Radio telemetry system – optional
-
Request a QuoteQuick View
Ultimate Controller
- 2 x 4-20mA inputs (passive or active)
- 2 x isolated mA outputs
- Ethernet
- Camera Port
- Touchscreen Display
- 2 x dB Transducer Inputs
- 8 relays (expandable)
- 8 digital inputs (expandable)
-
Request a QuoteQuick View
Ultra 4
Advanced Ultrasonic, Level, Flow, Volume and Pump Control
- Built-in volume calculations from standard tank shapes or calibration curves
- 8 GB Micro SD Card
- Echo profiles and level trend graphs are shown on the built-in display
- HART option
- RS485 Modbus/Profibus option
- Radar or Ultrasonic measurement technology
- 4 onboard relays assignable by type
- Wall or Fascia Mount
- mA Output
- The ability to measure pump control, flow measurement, and volume measurement in one compact unit
- Quick set up features allow the easy programming of parameters