Mechanical Flow meters

  • Plastic Sight Flow Indicator

    • 1/4 inch to 1 inch BSP/NPT connection
    • Easy to install in any position
    • No special piping or connections required
    • Robust with good shock and vibration resistance
    • Resistant to a wide range of chemicals
    • Temperature – 80°C (maximum working temperature)
    • Pressure – 40 bar (maximum working pressure)
  • Turbine Flow Meter TFM

    • Working Temp – 50ºC to + 282ºC
    • Accuracy + / -0.5% of reading over Flow Range
    • Repeatability + / – 0.15% of reading
    • Pressure Drop Less than 0.5 bar at Maximum Flow
    • Materials All 316 Stainlesss Steel with ANC1A Rotor
    • Bearings Wear Resistant Tungsten Carbide Sleeve
    • Pick Up The Lx variable reluctance sensor is hermetically sealed for resistance to moisture and can withstand repeated thermocycling.
    • The magnet is resistant to demagnetization.
    • Output is a low level signal that ranges from 10 mV to 1 V peak to peak.
    • A screened twin core signal cable should be used for connection to the Pick Up.
  • Turbine Flow Meter TRFM1.0

    • Cost Effective
    • Accurate Measurement 0.5% or 0.2% (optional)
    • Required Minimal Maintenance,
    • Excellent Repeatability 0.05%…0.2%,
    • Outputs 4-20 mA 2 wire or pulse output 3 wire
    • Ideal for Batching Aplications

     

  • Oval Gear Flow Meter

    • Accuracy: 0.5%, 0.2%
    • Line size: 10~200mm
    • Capability of measuring high-temperature and high-viscosity liquid
    • Small pressure loss
    • Simple installation
  • Miniature Variable Area Flow Switch

    • Complete stainless steel design
    • Universal mounting position
    • Small mounting dimensions
    • High switching accuracy
    • For low viscosity liquids
    • Small switch hysteresis
  • Flow Indicator Rising Ball

    • Clear flow indication
    • 16 bar pressure and 200˚C temperature capability
    • Excellent chemical compatibility due to the materials of construction
    • Can be used on condensate duty as well as liquids and gas
    • Operates over a wide flow range
    • Durable PTFE ball and borosilicate glass dome

  • Flow Indicator Spinner

    • Suitable for water and other clear liquids and gases
    • 16 bar pressure and 200˚C temperature capability
    • Precision moulded glass dome with yellow PPS plastic spinner
    • Can be used in any orientation
    • Bi-directional flow
    • Operates over a wide flow range

  • Flap, Spinner & Spout Visual Sight Indicator

    This new double window Flow Indicator is most useful where visual inspection of the pipeline content is needed as a plant safety or product quality measure. The sizeable windows allow an excellent view of the conditions in the line.

  • Mechanical Flow Meter Wafer Serie

    Direct reading Flow Rate Indication
    Optional (field adjustable) switch(es)
    Optional Non-Contact 4-20mA Output
    High Pressure available
    Mounts in any orientation
    No straight Pipe Run required • Connection sizes from 3” to 12”

  • Mechanical Flow Meter Low Flow

    -Water, De-Ionised Water
    -Soluble Oils (Glycols)
    -Petroleum Based Fluids
    -Synthetic Based Fluids Coolants
    -Corrosive Fluids Paints Solvents
    -Air & Gases

  • Mechanical Flow Meter Small Serie

  • Mechanical Flow Meter Medium Serie

    Switches:  field adjustable, suitable for batching,
    trending, totalising or recording where required.
    0-10 v or 4-20mA output.